<?php
/* $Id: slovenian-utf-8.inc.php 11883 2008-11-16 19:50:31Z lem9 $ */

/* By: urska.colner, agenda d.o.o. <urska.colner@agenda.si>, uros kositer, agenda d.o.o. <urosh@agenda.si> */

$charset = 'utf-8';
$text_dir = 'ltr'; // ('ltr' for left to right, 'rtl' for right to left)
$number_thousands_separator = '.';
$number_decimal_separator = ',';
// shortcuts for Byte, Kilo, Mega, Giga, Tera, Peta, Exa
$byteUnits = array('Bytes', 'KB', 'MB', 'GB', 'TB', 'PB', 'EB');

$day_of_week = array('Ned', 'Pon', 'Tor', 'Sre', 'Čet', 'Pet', 'Sob');
$month = array('Jan', 'Feb', 'Mar', 'Apr', 'Maj', 'Jun', 'Jul', 'Avg', 'Sep', 'Okt', 'Nov', 'Dec');
// See http://www.php.net/manual/en/function.strftime.php to define the
// variable below
$datefmt = '%d %B %Y ob %I:%M %p';
$timespanfmt = '%s dni, %s ur, %s minut in %s sekund';

$strAbortedClients = 'Prekinjeno';
$strAccessDenied = 'Dostop zavrnjen';
$strAccessDeniedExplanation = 'phpMyAdmin se je poskušal povezati na MySQL strežnik, ki je zavrnil povezavo. Preverite, ali gostitelj, uporabniško ime in geslo v datoteki config.inc.php ustrezajo podatkom administratorja MySQL strežnika.';
$strAction = 'Akcija';
$strAddAutoIncrement = 'Dodaj AUTO_INCREMENT vrednost';
$strAddConstraints = 'Dodaj omejitve';
$strAddDeleteColumn = 'Dodaj/Odstrani stolpec \'Polje\'';
$strAddDeleteRow = 'Dodaj/Odstrani vrstico \'Kriterij\'';
$strAddHeaderComment = 'Dodaj prilagojen komentar v glavo (\\n prelomi vrstice)';
$strAddIntoComments = 'Dodaj med komentarje';
$strAddNewField = 'Dodaj novo polje';
$strAddPrivilegesOnDb = 'Dodaj privilegije na naslednji podatkovni bazi';
$strAddPrivilegesOnTbl = 'Dodaj privilegije na naslednji tabeli';
$strAddSearchConditions = 'Dodaj iskalne pogoje (telo "where" stavka):';
$strAddToIndex = 'Dodaj indeksu &nbsp;%s&nbsp;stolpec(ce)';
$strAddUser = 'Dodaj novega uporabnika';
$strAddUserMessage = 'Dodali ste novega uporabnika.';
$strAdministration = 'Administracija';
$strAfterInsertBack = 'Nazaj na prejšnjo stran';
$strAfterInsertNewInsert = 'Vstavi še eno novo vrstico';
$strAfterInsertSame = 'Pojdi nazaj na stran';
$strAfter = 'Po %s';
$strAllTableSameWidth = 'prikažem vse tabele enake širine?';
$strAll = 'Vse/Vsi';
$strAlterOrderBy = 'Spremeni vrstni red prikaza tabele za';
$strAnalyzeTable = 'Analiziraj tabelo';
$strAnd = 'In';
$strAnIndex = 'Na %s je dodan indeks';
$strAnyHost = 'Katerikoli gostitelj';
$strAny = 'Katerikoli';
$strAnyUser = 'Katerikoli uporabnik';
$strAPrimaryKey = 'Na %s je dodan primarni ključ';
$strArabic = 'Arabsko';
$strArmenian = 'Armensko';
$strAscending = 'Naraščajoče';
$strAtBeginningOfTable = 'Na začetku tabele';
$strAtEndOfTable = 'Na koncu tabele';
$strAttr = 'Atributi';
$strAutomaticLayout = 'Samodejna postavitev';

$strBack = 'Nazaj';
$strBaltic = 'Baltsko';
$strBeginCut = 'ZAČETEK IZREZA';
$strBeginRaw = 'BEGIN RAW';
$strBinary = 'Binarno';
$strBinaryDoNotEdit = 'Binarno - ne urejaj';
$strBookmarkAllUsers = 'Dovoli dostop do zaznamka vsem uporabnikom';
$strBookmarkDeleted = 'Zaznamek je odstranjen.';
$strBookmarkLabel = 'Nalepka';
$strBookmarkQuery = 'Označena SQL-poizvedba';
$strBookmarkThis = 'Označi to SQL-poizvedbo';
$strBookmarkView = 'Samo pogled';
$strBrowseForeignValues = 'Prebrskaj tuje vrednosti';
$strBrowse = 'Prebrskaj';
$strBulgarian = 'Bolgarsko';
$strBzip = '"bzipano"';

$strCalendar = 'Koledar';
$strCannotLogin = 'Ne morem se prijaviti v MySQL strežnik';
$strCantLoad = 'ne morem naložiti podaljška %s,<br />prosim preverite PHP konfiguracijo';
$strCantLoadRecodeIconv = 'Ni mogoče naložiti iconv ali recode ekstenzij, ki so potrebne za pretvorbe kodnih tabel, konfigurirajte php tako, da bo omogočal uporabo teh ekstenzij ali onemogočite pretvarjanje kodnih tabel v phpMyAdmin.';
$strCantRenameIdxToPrimary = 'Indeksa ni mogoče preimenovati v PRIMARY!';
$strCantUseRecodeIconv = 'Ni mogoče uporabljati iconv, libiconv ali recode_string funkcij, čeprav so ekstenzije normalno naložene. Preverite konfiguracijo php.';
$strCardinality = 'Kardinalnost';
$strCaseInsensitive = 'ne razlikuj velikih in malih črk';
$strCaseSensitive = 'razlikuj velike in male črke';
$strCentralEuropean = 'Centralno evropsko';
$strChangeCopyModeCopy = '... obdrži starega.';
$strChangeCopyModeDeleteAndReload = ' ... izbriši starega uporabnika s seznama uporabnikov ter ponovno naloži njegove pravice.';
$strChangeCopyModeJustDelete = ' ... izbriši starega s seznama uporabnikov.';
$strChangeCopyModeRevoke = ' ... prekliči vse aktivne pravice starega uporabnika ter jih izbriši.';
$strChangeCopyMode = 'Ustvari novega uporabnika z enakimi pravicami in ...';
$strChangeCopyUser = 'Spremeni prijavne informacije / Kopiraj uporabnika';
$strChangeDisplay = 'Izberite polje za prikaz';
$strChangePassword = 'Spremeni geslo';
$strChange = 'Spremeni';
$strCharset = 'Nabor znakov';
$strCharsetOfFile = 'Nabor znakov datoteke:';
$strCharsetsAndCollations = 'Nabori znakov in pravila za razvrščanje znakov';
$strCharsets = 'Nabori znakov';
$strCheckAll = 'Označi vse';
$strCheckOverhead = 'Preveri prekoračene';
$strCheckPrivsLong = 'Preveri privilegije za podatkovno bazo &quot;%s&quot;.';
$strCheckPrivs = 'Preveri privilegije';
$strCheckTable = 'Preveri tabelo';
$strChoosePage = 'Izberite stran za urejanje';
$strColComFeat = 'Prikazovanje komentarjev stolpcev';
$strCollation = 'Pravilo za razvrščanje znakov';
$strColumnNames = 'Imena stolpcev';
$strColumnPrivileges = 'Privilegiji tipični za stolpec';
$strCommand = 'Ukaz';
$strComments = 'Komentarji';
$strCompleteInserts = 'Popolne \'insert\' poizvedbe';
$strCompression = 'Stiskanje';
$strConfigFileError = 'phpMyAdmin ni mogel prebrati konfiguracijske datoteke!<br />To se lahko zgodi, če php pri prevajanju konfiguracijske datoteke najde napako ali pa ne najde datoteke.<br />Prosimo, odprite konfiguracijsko datoteko s povezavo, ki je navedena spodaj in preberite dobljeno sporočilo o napaki. V večini primerov gre za manjkajoči narekovaj ali podpičje.<br />Če dobite prazno stran, je vse v redu.';
$strConfigureTableCoord = 'Prosimo, konfigurirajte koordinate za tabelo %s';
$strConnectionError = 'Povezava ni mogoča: neveljavne nastavitve.';
$strConnections = 'Povezave';
$strConstraintsForDumped = 'Omejitve tabel za povzetek stanja';
$strConstraintsForTable = 'Omejitve za tabelo';
$strCookiesRequired = 'Če želite še dalje uporabljati program, morate omogočiti piškotke.';
$strCopyTable = 'Kopiraj tabelo v (podatkovna_baza<b>.</b>tabela):';
$strCopyTableOK = 'Tabela %s je skopirana v %s.';
$strCopyTableSameNames = 'Tabele ni mogoče kopirati same vase!';
$strCouldNotKill = 'phpMyAdmin ni uspel prekiniti teme %s. Verjetno je že prekinjena.';
$strCreateIndexTopic = 'Ustvari nov indeks';
$strCreateIndex = 'Ustvari indeks na&nbsp;%s&nbsp;stolpcih';
$strCreateNewDatabase = 'Ustvari novo podatkovno bazo';
$strCreateNewTable = 'Ustvari novo tabelo v podatkovni bazi %s';
$strCreatePage = 'Ustvari novo stran';
$strCreatePdfFeat = 'Ustvarjanje PDF datotek';
$strCreate = 'Ustvari';
$strCreationDates = 'Datumi za ustvarjeno/posodobljeno/preverjeno';
$strCriteria = 'Kriteriji';
$strCroatian = 'Hrvaško';
$strCyrillic = 'Cirilica';
$strCzech = 'Češko';
$strCzechSlovak = 'Češkoslovaško';

$strDanish = 'Dansko';
$strDatabaseEmpty = 'Ime podatkovne baze je prazno!';
$strDatabaseExportOptions = 'Možnosti za izvoz baze podatkov';
$strDatabaseHasBeenDropped = 'Podatkovna baza %s je zavržena.';
$strDatabase = 'Podatkovna baza';
$strDatabasesDropped = '%s podatkovne baze so uspešno zavržene.';
$strDatabases = 'podatkovne baze';
$strDatabasesStatsDisable = 'Onemogoči statistiko';
$strDatabasesStatsEnable = 'Omogoči statistiko';
$strDatabasesStatsHeavyTraffic = 'Obvestilo: Omogočitev statistike podatkovne baze lahko povzroči močno povečan promet med spletnim in podatkovnim strežnikom.';
$strDatabasesStats = 'Statistika podatkovnih baz';
$strDataDict = 'Podatkovni slovar';
$strDataOnly = 'Samo podatki';
$strData = 'Podatki';
$strDBComment = 'Komentar zbirke podatkov: ';
$strDbPrivileges = 'Privilegiji tipični za podatkovno bazo';
$strDBRename = 'Preimenuj podatkovno bazo v';
$strDbSpecific = 'glede na zbirko podatkov';
$strDefault = 'Privzeto';
$strDefaultValueHelp = 'Za privzete vrednosti vnesite samo vrednosti, brez poševnice nazaj ali narekovaja, npr.: a';
$strDelayedInserts = 'Uporabi zakasnjeno vstavljanje';
$strDeleteAndFlushDescr = 'To je najboljši način, vendar lahko osveževanje privilegijev traja nekaj časa.';
$strDeleteAndFlush = 'Izbriši uporabnike in potem osveži privilegije.';
$strDeleted = 'Vrstica je izbrisana';
$strDelete = 'Izbriši';
$strDeleting = 'Brišem %s';
$strDelOld = 'Trenutna stran vsebuje sklice na tabele, ki ne obstajajo več. Ali želite izbrisati te sklice?';
$strDescending = 'Padajoče';
$strDescription = 'Opis';
$strDictionary = 'slovar';
$strDisabled = 'Onemogočeno';
$strDisplayFeat = 'Prikaži lastnosti';
$strDisplayOrder = 'Vrstni red prikaza:';
$strDisplayPDF = 'Prikaži PDF shemo';
$strDoAQuery = 'Izvedi "query by example" (nadomestni znak: "%")';
$strDocu = 'Dokumentacija';
$strDoYouReally = 'Ali res želite ';
$strDropDatabaseStrongWarning = 'S tem dejanjem boste UNIČILI celotno bazo podatkov!';
$strDropUsersDb = 'Izbriši podatkovne baze, ki imajo enako ime kot uporabniki.';
$strDrop = 'Zavrži';
$strDumpingData = 'Odloži podatke za tabelo';
$strDumpSaved = 'Dump je shranjen v datoteko %s.';
$strDumpXRows = 'Odloži %s vrstic, začni z zapisom # %s.';
$strDynamic = 'dinamično';

$strEditPDFPages = 'Uredi PDF strani';
$strEditPrivileges = 'Uredi privilegije';
$strEdit = 'Uredi';
$strEffective = 'Učinkovito';
$strEmpty = 'Izprazni';
$strEmptyResultSet = 'MySQL je vrnil kot rezultat prazno množico (npr. nič vrstic).';
$strEnabled = 'Omogočeno';
$strEncloseInTransaction = 'Vključi izvoz v transakcijo';
$strEndCut = 'KONEC IZREZA';
$strEnd = 'Konec';
$strEndRaw = 'END RAW';
$strEnglish = 'Angleško';
$strEnglishPrivileges = ' Opomba: Imena MySQL privilegijev so zapisana v angleščini ';
$strError = 'Napaka';
$strEstonian = 'Estonsko';
$strExcelEdition = 'Izdaja za Excel';
$strExecuteBookmarked = 'Izvedi izbrano poizvedbo';
$strExplain = 'Razloži SQL stavek';
$strExport = 'Izvozi';
$strExtendedInserts = 'Razširjene \'insert\' poizvedbe';
$strExtra = 'Dodatno';

$strFailedAttempts = 'Neuspeli poizkusi';
$strFieldHasBeenDropped = 'Polje %s je zavrženo';
$strField = 'Polje';
$strFieldsEnclosedBy = 'Polja obdana z';
$strFieldsEscapedBy = 'Polja izognjena z';
$strFields = 'Polja';
$strFieldsTerminatedBy = 'Polja zaključena z';
$strFileAlreadyExists = 'Datoteka %s že obstaja na strežniku, spremenite ime novi ali prepišite obstoječo datoteko.';
$strFileCouldNotBeRead = 'Ne morem prebrati datoteke';
$strFileNameTemplate = 'Predloga datoteke';
$strFileNameTemplateRemember = 'Shrani predlogo';
$strFixed = 'fiksno';
$strFlushPrivilegesNote = 'Obvestilo: phpMyAdmin dobi podatke o uporabnikovih privilegijih iz MySQL tabel privilegijev. Vsebina teh tabel se lahko razlikuje od privilegijev, ki jih uporablja strežnik, če so bile tabele ročno spremenjene. V tem primeru morate, preden nadaljujete, osvežiti privilegije.';
$strFlushTable = 'Počisti tabelo ("FLUSH")';
$strFormat = 'Oblika';
$strFormEmpty = 'V obliki manjka vrednost !';
$strFullText = 'Polna besedila';
$strFunction = 'Funkcija';

$strGenBy = 'Ustvaril';
$strGeneralRelationFeat = 'Splošne lastnosti relacij';
$strGenTime = 'Čas nastanka';
$strGeorgian = 'Gruzijsko';
$strGerman = 'Nemško';
$strGlobal = 'globalno';
$strGlobalPrivileges = 'Globalni privilegiji';
$strGlobalValue = 'Skupna vrednost';
$strGo = 'Izvedi';
$strGrantOption = 'Dovoli';
$strGreek = 'Grško';
$strGzip = '"gzipano"';

$strHasBeenAltered = 'je bil spremenjen(a).';
$strHaveToShow = 'Za prikaz morate izbrati morate vsaj en stolpec';
$strHebrew = 'Hebrejsko';
$strHome = 'Domov';
$strHomepageOfficial = 'Uradna domača stran phpMyAdmin';
$strHostEmpty = 'Ime gostitelja je prazno!';
$strHost = 'Gostitelj';
$strHungarian = 'Madžarsko';

$strId = 'ID';
$strIdxFulltext = 'Polno besedilo';
$strIgnoreInserts = 'Uporabi možnost prezri vstavke';
$strIgnore = 'Prezri';
$strImportFiles = 'Uvozi datoteke';
$strIndexes = 'Indeksi';
$strIndexHasBeenDropped = 'Indeks %s je zavržen';
$strIndex = 'Indeks';
$strIndexName = 'Ime indeksa&nbsp;:';
$strIndexType = 'Vrsta indeksa&nbsp;:';
$strInnodbStat = 'InnoDB stanje';
$strInsecureMySQL = 'Konfiguracijska datoteka vsebuje nastavitve (uporabnik root brez gesla), ki odgovarjajo privzetemu privlegiranemu računu MySQLa. MySQL strežnik teče s privzetimi nastavitvami, zato je izpostavljen vdorom. Čimprej odpravite ti dve varnostni luknji.';
$strInsertAsNewRow = 'Vstavi kot novo vrstico';
$strInsert = 'Vstavi';
$strInternalRelations = 'Notranje relacije';
$strInUse = 'v uporabi';

$strJapanese = 'Japonsko';
$strJumpToDB = 'Preskoči na podatkovno bazo &quot;%s&quot;.';
$strJustDeleteDescr = '&quot;Izbrisani&quot; uporabniki lahko še vedno normalno dostopajo do strežnika, dokler ne osvežite privilegijev';
$strJustDelete = 'Samo izbriši uporabnike iz tabel privilegijev.';

$strKeepPass = 'Ne spreminjaj gesla';
$strKeyname = 'Ime ključa';
$strKill = 'Prekini proces';
$strKorean = 'Korejsko';

$strLandscape = 'Ležeče';
$strLatexCaption = 'Ime tabele';
$strLatexContent = 'Vsebina tabele __TABLE__';
$strLatexContinuedCaption = 'Nadaljevanje imena tabele';
$strLatexContinued = '(nadaljevanje)';
$strLatexIncludeCaption = 'Vključi ime tabele';
$strLatexLabel = 'Označi ključ';
$strLaTeX = 'LaTeX';
$strLatexStructure = 'Struktura tabele __TABLE__';
$strLengthSet = 'Dolžina/Vrednosti*';
$strLimitNumRows = 'Število vrstic na stran';
$strLinesTerminatedBy = 'Vrstice zaključene z';
$strLinkNotFound = 'Povezave ni mogoče najti';
$strLinksTo = 'Povezave z';
$strLithuanian = 'Litvansko';
$strLocalhost = 'Lokalno';
$strLocationTextfile = 'Lokacija datoteke z besedilom';
$strLoginInformation = 'Podatki o prijavi';
$strLogin = 'Prijava';
$strLogout = 'Odjava';
$strLogPassword = 'Geslo:';
$strLogServer = 'Strežnik';
$strLogUsername = 'Uporabniško ime:';

$strMaximumSize = 'Največja velikost: %s%s';
$strMIME_available_mime = 'Razpoložljive MIME-vrste';
$strMIME_available_transform = 'Razpoložljive pretvorbe';
$strMIME_description = 'Opis';
$strMIME_MIMEtype = 'MIME-vrsta';
$strMIME_nodescription = 'Za to pretvorbo ni na voljo opisa.<br />Za funkcije %s se pozanimajte pri avtorju.';
$strMIME_transformation_note = 'Seznam razpoložljivih možnosti pretvorbe in pretvorbe MIME-vrst boste videli, če kliknete na %sopise transformacij%s';
$strMIME_transformation_options = 'Možnosti pretvorbe';
$strMIME_transformation_options_note = 'Vrednosti za možnosti pretvorbe vnesite v naslednji obliki: \'a\', 100, b,\'c\'...<br />Če želite med vrednosti vnesti poševnico nazaj ("\") ali enojni narekovaj ("\'"), morate pred ta znak postaviti (še eno) poševnico nazaj (npr. \'\\\\xyz\' ali \'a\\\'b\').';
$strMIME_transformation = 'Pretvorba z brskalnikom';
$strMIMETypesForTable = 'VRSTE MIME ZA TABELO';
$strMIME_without = 'MIME-vrste, ki so napisano ležeče, nimajo lastne pretvorbene funkcije';
$strModifications = 'Spremembe so shranjene';
$strModifyIndexTopic = 'Spremeni indeks';
$strModify = 'Spremeni';
$strMoveTableOK = 'Tabela %s je bila premaknjena v %s.';
$strMoveTable = 'Premakni tabelo v (podatkovna_baza<b>.</b>tabela):';
$strMoveTableSameNames = 'Tabele ni mogoče premakniti same vase!';
$strMultilingual = 'večjezično';
$strMySQLCharset = 'MySQL kodna tabela';
$strMySQLSaid = 'MySQL je vrnil: ';
$strMySQLShowProcess = 'Pokaži procese';

$strName = 'Ime';
$strNext = 'Naslednji';
$strNoDatabases = 'Brez podatkovnih baz';
$strNoDatabasesSelected = 'Ni izbranih podatkovnih baz.';
$strNoDescription = 'brez opisa';
$strNoDropDatabases = '"DROP DATABASE" poizvedbe so izključene.';
$strNoExplain = 'Preskoči razlago SQL stavka';
$strNoFrames = 'phpMyAdmin je prijaznejši z brskalnikom, ki podpira okvirje.';
$strNoIndex = 'Ni definiranega indeksa!';
$strNoIndexPartsDefined = 'Ni definiranega dela indeksa!';
$strNoModification = 'Brez sprememb';
$strNo = 'Ne';
$strNone = 'Brez';
$strNoOptions = 'Za to obliko ni možnosti';
$strNoPassword = 'Brez gesla';
$strNoPermission = 'Spletni strežnik nima dovoljenja za shranjevanje datoteke %s';
$strNoPhp = 'Brez kode PHP';
$strNoPrivileges = 'Brez privilegijev';
$strNoRights = 'Nimate dovolj pravic, da bi bili sedaj tukaj!';
$strNoSpace = 'Ni dovolj prostora za shranjevanje datoteke %s.';
$strNoTablesFound = 'V podatkovni bazi ni mogoče najti tabel.';
$strNotNumber = 'To ni število!';
$strNotOK = 'Ni v redu';
$strNotSet = 'Tabele <b>%s</b> ni mogoče najti ali pa ni v %s';
$strNoUsersFound = 'Ni mogoče najti uporabnika(ov).';
$strNoValidateSQL = 'Preskoči preverjanje pravilnosti SQL stavka';
$strNull = 'Null';
$strNumSearchResultsInTable = '%s zadetek(ov) v tabeli <i>%s</i>';
$strNumSearchResultsTotal = '<b>Skupaj:</b> <i>%s</i> zadetek(ov)';
$strNumTables = 'Ttabel';

$strOK = 'V redu';
$strOperations = 'Operacije';
$strOperator = 'Operator';
$strOptimizeTable = 'Optimiraj tabelo';
$strOr = 'Ali';
$strOverhead = 'Presežek';
$strOverwriteExisting = 'Prepiši obstoječo(e) datoteko(e)';

$strPageNumber = 'Številka strani:';
$strPaperSize = 'Velikost papirja';
$strPartialText = 'Delna besedila';
$strPasswordChanged = 'Geslo za %s je uspešno spremenjeno.';
$strPasswordEmpty = 'Geslo je prazno!';
$strPassword = 'Geslo';
$strPasswordNotSame = 'Gesli se ne ujemata!';
$strPdfDbSchema = 'Shema podatkovne baze "%s" - Stran %s';
$strPdfInvalidTblName = 'Tabela "%s" ne obstaja!';
$strPdfNoTables = 'Ni tabel';
$strPerHour = 'na uro';
$strPerMinute = 'na minuto';
$strPerSecond = 'na sekundo';
$strPhoneBook = 'telefonski imenik';
$strPhp = 'Ustvari PHP kodo';
$strPHPVersion = 'Različica PHP';
$strPmaDocumentation = 'phpMyAdmin dokumentacija';
$strPmaUriError = 'Ukaz <tt>$cfg[\'PmaAbsoluteUri\']</tt> mora biti definiran v konfiguracijski datoteki!';
$strPortrait = 'Pokončno';
$strPos1 = 'Začetek';
$strPrevious = 'Prejšnji';
$strPrimaryKeyHasBeenDropped = 'Primarni ključ je zavržen';
$strPrimaryKeyName = 'Ime primarnega ključa mora biti... PRIMARY!';
$strPrimaryKeyWarning = '("PRIMARY" <b>mora</b> biti ime <b>samo</b> primarnega ključa!)';
$strPrimary = 'Primarni';
$strPrint = 'Natisni';
$strPrintViewFull = 'Pogled za tiskanje (s polnimi besedili)';
$strPrintView = 'Pogled postavitve tiskanja';
$strPrivDescAllPrivileges = 'Vsebuje vse privilegije razen GRANT.';
$strPrivDescAlter = 'Omogoča spreminjanje strukture obstoječih tabel.';
$strPrivDescCreateDb = 'Omogoča ustvarjanje novih podatkovnih baz in tabel.';
$strPrivDescCreateTbl = 'Omogoča ustvarjanje novih tabel.';
$strPrivDescCreateTmpTable = 'Omogoča ustvarjanje začasnih tabel.';
$strPrivDescDelete = 'Omogoča brisanje podatkov.';
$strPrivDescDropDb = 'Omogoča brisanje podatkovnih baz in tabel.';
$strPrivDescDropTbl = 'Omogoča brisanje tabel.';
$strPrivDescExecute = 'Omogoča poganjanje shranjenih postopkov; V tej verziji MySQL nima pomena.';
$strPrivDescFile = 'Omogoča uvažanje in izvažanje podatkov v datoteke.';
$strPrivDescGrant = 'Omogoča dodajanje uporabnikov in privilegijev brez osveževanja privilegijev.';
$strPrivDescIndex = 'Omogoča ustvarjanje in brisanje indeksov.';
$strPrivDescInsert = 'Omogoča vstavljanje in zamenjavo podatkov.';
$strPrivDescLockTables = 'Omogoča zaklepanje tabel za trenutno temo.';
$strPrivDescMaxConnections = 'Omeji število povezav, ki jih uporabnik lahko odpre v eni uri.';
$strPrivDescMaxQuestions = 'Omeji število poizved, ki jih uporabnik lahko pošlje strežniku v eni uri.';
$strPrivDescMaxUpdates = 'Omeji število ukazov za spremembo tabel ali podatkovne baze, ki jih uporabnik lahko izvrši v eni uri.';
$strPrivDescReferences = 'V tej verziji MySQL nima pomena.';
$strPrivDescReload = 'Omogoča osveževanje strežnikovih nastavitev in praznjenje strežnikovih predpomnilnikov.';
$strPrivDescReplClient = 'Da uporabniku pravico poizvedovati kje so njegovi nadrejeni / podrjeni strežniki.';
$strPrivDescReplSlave = 'Potrebno za podrejene strežnike pri replikaciji.';
$strPrivDescSelect = 'Omogoča branje podatkov.';
$strPrivDescShowDb = 'Omogoča dostop do popolnega spiska podatkovnih baz';
$strPrivDescShutdown = 'Omogoča ugašanje strežnika.';
$strPrivDescSuper = 'Omogoča priklaplanje tudi če je že doseženo največje dovoljeno število priklopov; Potrebno za večino administrativnih nalog kot sta postavljanje globalnih spremenljivk in ukinjanje procesov drugih uporabnikov.';
$strPrivDescUpdate = 'Omogoča spreminjanje podatkov.';
$strPrivDescUsage = 'Brez privilegijev.';
$strPrivileges = 'Privilegiji';
$strPrivilegesReloaded = 'Uspešno sem osvežil privilegije.';
$strProcesses = 'Procesi';
$strProcesslist = 'Seznam procesov';
$strPutColNames = 'Postavi imena polj v prvo vrstico';

$strQBEDel = 'Briši';
$strQBEIns = 'Vstavi';
$strQBE = 'Poizvedba';
$strQueryFrame = 'Okno za iskanje';
$strQueryOnDb = 'SQL-poizvedba na podatkovni bazi <b>%s</b>:';
$strQuerySQLHistory = 'SQL-zgodovina';
$strQueryStatistics = '<b>Statistika poizvedbe</b>: Od zagona je bilo strežniku poslanih %s poizvedb.';
$strQueryTime = 'Poizvedba je potrebovala %01.4f s';
$strQueryType = 'Vrsta poizvedbe';
$strQueryWindowLock = 'Ne prepiši te poizvedbe od zunaj';

$strReceived = 'Prejeto';
$strRecords = 'Zapisi';
$strReferentialIntegrity = 'Preveri referenčno integriteto:';
$strRelationalSchema = 'Relacijska shema';
$strRelationNotWorking = 'Dodatne funkcije za delo s povezanimi tabelami so bile izkjučene. Če želite izvedeti zakaj, kliknite %stukaj%s.';
$strRelationsForTable = 'RELACIJE ZA TABELO';
$strRelations = 'Relacije';
$strRelationView = 'Pogled relacij';
$strReloadingThePrivileges = 'Osvežujem privilegije';
$strRemoveSelectedUsers = 'Izbriši izbrane uporabnike';
$strRenameDatabaseOK = 'Baza podatkov %s je preimenovana v %s';
$strRenameTableOK = 'Tabela %s je preimenovana v %s';
$strRenameTable = 'Preimenuj tabelo v';
$strRepairTable = 'Popravi tabelo';
$strReplaceNULLBy = 'Zamenjaj NULL z';
$strReplaceTable = 'Podatke v tabeli zamenjaj z datoteko';
$strReset = 'Ponastavi';
$strResourceLimits = 'Omejitve virov';
$strReType = 'Ponovno vnesi';
$strRevokeAndDeleteDescr = 'Uporabniki bodo še vedno imeli USAGE privilegije, dokler ne osvežite privilegijev.';
$strRevokeAndDelete = 'Odvzemi uporabnikom aktivne privilegije in jih potem izbriši.';
$strRevokeMessage = 'Odvzeli ste privilegije za %s';
$strRevoke = 'Odvzemi';
$strRowLength = 'Dolžina vrstice';
$strRowsFrom = 'vrstice naprej od zapisa #';
$strRowSize = ' Velikost vrstice ';
$strRowsModeFlippedHorizontal = 'vodoravno (zasukani naslovi)';
$strRowsModeHorizontal = 'vodoravnem';
$strRowsModeOptions = 'v %s načinu in ponovi glavo po %s celicah';
$strRowsModeVertical = 'navpičnem';
$strRowsStatistic = 'Statistika vrstic';
$strRows = 'Vrstice';
$strRunning = 'teče na %s';
$strRunQuery = 'Izvedi poizvedbo';
$strRunSQLQuery = 'Izvedi SQL poizvedbo/poizvedbe na podatkovni bazi %s';
$strRussian = 'Rusko';

$strSaveOnServer = 'Shrani na strežnik, v imenik %s';
$strSave = 'Shrani';
$strScaleFactorSmall = 'Faktor povečava je premajhen, da bi spravili shemo na eno stran';
$strSearchFormTitle = 'Išči v podatkovni bazi';
$strSearchInTables = 'V tabelah:';
$strSearch = 'Iskanje';
$strSearchNeedle = 'Iskane besede ali vrednosti (nadomestni znak: "%"):';
$strSearchOption1 = 'katerokoli besedo';
$strSearchOption2 = 'vse besede';
$strSearchOption3 = 'točno določeno frazo';
$strSearchOption4 = 'kot \'regular expression\'';
$strSearchResultsFor = 'Rezultati iskanja "<i>%s</i>" %s:';
$strSearchType = 'Najdi:';
$strSecretRequired = 'Konfiguracijski datoteki morate sedaj določiti skrivno geslo (blowfish_secret).';
$strSelectADb = 'Prosimo, izberite podatkovno bazo';
$strSelectAll = 'Izberi vse';
$strSelectFields = 'Izberite polja (vsaj eno):';
$strSelectNumRows = 'in poizvedba';
$strSelectTables = 'Izberi tabele';
$strSend = 'Shrani kot datoteko';
$strSent = 'Poslano';
$strServerChoice = 'Izbira strežnika';
$strServerStatus = 'Podatki o izvajanju';
$strServerStatusUptime = 'MySQL strežnik deluje že %s. Zagnal se je %s.';
$strServer = 'Strežnik';
$strServerTabVariables = 'Spremenljivke';
$strServerTrafficNotes = '<b>Promet na strežniku</b>: V teh tabelah je prikazana statistika obremenitve omrežja za ta MySQL strežnik, odkar je bil zagnan.';
$strServerVars = 'Spremenljivke in nastavitve strežnika';
$strServerVersion = 'Različica strežnika';
$strSessionValue = 'Vrednost seje';
$strSetEnumVal = 'Če je polje vrste "enum" ali "set", navedite vrednosti v obliki: \'a\',\'b\',\'c\'...<br /> Če želite med vrednostmi uporabiti poševnico ("\") ali enojni narekovaj ("\'"), pred tem znakom vnesite poševnico (n.pr. \'\\\\xyz\' ali \'a\\\'b\').';
$strShowAll = 'Pokaži vse';
$strShowColor = 'Pokaži barvo';
$strShowDatadictAs = 'Oblika podatkovnega slovarja';
$strShowFullQueries = 'Pokaži celotne poizvedbe';
$strShowGrid = 'Pokaži mrežo';
$strShowingRecords = 'Prikazujem vrstice';
$strShowPHPInfo = 'Pokaži podatke o PHP';
$strShow = 'Pokaži';
$strShowTableDimension = 'Pokaži dimenzije tabel';
$strShowTables = 'Pokaži tabele';
$strShowThisQuery = ' Ponovno pokaži poizvedbo v tem oknu ';
$strSimplifiedChinese = 'Poenostavljeno kitajsko';
$strSingly = '(posamezno)';
$strSize = 'Velikost';
$strSortByKey = 'Uredi po ključu';
$strSort = 'Sortiraj';
$strSpaceUsage = 'Poraba prostora';
$strSplitWordsWithSpace = 'Besede so ločene s presledkom (" ").';
$strSQLExportType = 'Vrsta izvoza';
$strSQLParserBugMessage = 'Obstaja možnost, da ste v SQL razčlenjevalniku naleteli na hrošča. Temeljito preglejte poizvedbo in preverite, če so citati pravilni in če se ujemajo. Možno je tudi, da prenašate binarno datoteko, ki je izven področja besedila citata. Poizvedbo lahko preizkusite tudi na vmesniku ukazne vrstice MySQL. Če je strežnik MySQL izpisal napako, vam le-ta lahko pomaga pri ugotavljanju težav. Če se bodo težave nadaljevale, ali če razčlenjevalniku ne uspe tam, kjer vmesniku ukazne vrstice uspe, potem zmanjšajte vnešeno SQL poizvedbo na tisto poizvedbo, ki povzroča težave in pošljite poročilo o napaki skupaj s podatki iz spodnjega odseka IZREZA.';
$strSQLParserUserError = 'Izgleda, da je v SQL poizvedbi prišlo do napake. Če je strežnik MySQL izpisal napako, vam le-ta lahko pomaga pri ugotavljanju težav.';
$strSQLQuery = 'SQL-poizvedba';
$strSQLResult = 'Rezultat SQL';
$strSQL = 'SQL';
$strSQPBugInvalidIdentifer = 'Neveljavni identifikator';
$strSQPBugUnclosedQuote = 'Odprt citat';
$strSQPBugUnknownPunctuation = 'Neznan niz ločil';
$strStatCheckTime = 'Zadnjič pregledano';
$strStatCreateTime = 'Ustvarjeno';
$strStatement = 'Izjave';
$strStatUpdateTime = 'Zadnjič posodobljeno';
$strStatus = 'Stanje';
$strStrucCSV = 'CSV podatki';
$strStrucData = 'Struktura in podatki';
$strStrucExcelCSV = 'CSV podatki za MS Excel';
$strStrucOnly = 'Samo struktura';
$strStructPropose = 'Predlagaj strukturo tabele';
$strStructure = 'Struktura';
$strSubmit = 'Pošlji';
$strSuccess = 'SQL-poizvedba je bila uspešno izvedena';
$strSum = 'Vsota';
$strSwedish = 'Švedsko';
$strSwitchToTable = 'Preklopi na kopirano tabelo';

$strTableComments = 'Komentar tabele';
$strTableEmpty = 'Ime tabele je prazno!';
$strTableHasBeenDropped = 'Tabela %s je zavržena';
$strTableHasBeenEmptied = 'Tabela %s je izpraznjena';
$strTableHasBeenFlushed = 'Tabela %s je osvežena';
$strTableMaintenance = 'Vzdrževanje tabele';
$strTableOfContents = 'Vsebina';
$strTableOptions = 'Možnosti tabele';
$strTables = '%s tabel';
$strTableStructure = 'Struktura tabele';
$strTable = 'Tabela';
$strTblPrivileges = 'Privilegiji tipični za tabelo';
$strTextAreaLength = ' Zaradi njegove dolžine<br /> polja ne bo mogoče urejati ';
$strThai = 'Tajsko';
$strThisHost = 'Ta strežnik';
$strThreadSuccessfullyKilled = 'Tema %s je bila prekinjena.';
$strTime = 'Čas';
$strToggleScratchboard = 'preklopi odložišče (scratchboard)';
$strTotal = 'skupaj';
$strTotalUC = 'Skupaj';
$strTraditionalChinese = 'Tradicionalno kitajsko';
$strTraffic = 'Promet';
$strTransformation_application_octetstream__download = 'Prikaži povezavo za prenos binarnih podatkov polja. Prva možnost je ime binarne datoteke. Druga možnost je možno ime polja v vrstici tabele, ki vsebuje to ime datoteke. Če vnesete drugo možnost, mora biti prva možnost prazna';
$strTransformation_image_jpeg__inline = 'Prikaže sličico, na katero lahko kliknete; možnosti: širina, višina v slikovnih pikah (obdrži prvotna razmerja)';
$strTransformation_image_jpeg__link = 'Pokaže povezavo na grafiko (neposredni BLOB prenos, ipd.).';
$strTransformation_image_png__inline = 'Pokaži sliko/jpeg: vključeno';
$strTransformation_text_plain__external = 'SAMO ZA LINUX: Zažene zunanjo aplikacijo in podaja podatke za fielddata preko standardnega vhoda. Vrne standardni izhod aplikacije. Privzeto je Tidy, za tiskanje HTML-kode. Zaradi varnostnih razlogov morate ročno urediti datoteko libraries/transformations/text_plain__external.inc.php in vstaviti orodja za zaganjanje. Prva možnost je številka programa, ki ga želite uporabiti, druga možnost pa so parametri za program. Če tretji parameter nastavite na 1, bo s pomočjo htmlspecialchars() pretvoril izhod (Privzeto: 1). Če nastavite četrti parameter na 1, bo v celico z vsebino (content cell) vnesel NOWRAP in tako prikazal celoten izhod brez preoblikovanja (Privzeto: 1)';
$strTransformation_text_plain__formatted = 'Ohrani izvirno oblikovanje polja, brez izgubljanja vsebine.';
$strTransformation_text_plain__imagelink = 'Prikaže sliko in povezavo, polje vsebuje ime datoteke; najprej je predpona, npr. "http://domena.com/", druga možnost je širina v slikovnih pikah, tretja pa višina.';
$strTransformation_text_plain__link = 'Prikaže povezavo, polje vsebuje ime datoteke; prva možnost je predpona, npr. "http://domena.com/", druga pa ime povezave.';
$strTransformation_text_plain__substr = 'Vrne le del niza. Prva možnost je odmik, ki določa, kje se bo začelo prikazano besedilo (Privzeto: 0). Druga možnost je odmik, ki pove, koliko besedila bo prikazanega. Če ni določen, bo izpisano vse preostalo besedilo. Tretja možnost pa določa, kateri znaki bodo pripeti vrnjenemu podnizu (Privzeto: ...) .';
$strTruncateQueries = 'Skrči prikazane poizvedbe';
$strTurkish = 'Turško';
$strType = 'Vrsta';

$strUkrainian = 'Ukrajinsko';
$strUncheckAll = 'Odznači vse';
$strUnicode = 'Unicode';
$strUnique = 'Unikaten';
$strUnknown = 'neznano';
$strUnselectAll = 'Prekliči izbor vsega';
$strUpdatePrivMessage = 'Posodobili ste privilegije za %s.';
$strUpdateProfileMessage = 'Profil je posodobljen.';
$strUpdateQuery = 'Osveži poizvedbo';
$strUpdComTab = 'Navodila za posodobitev tabele Column_comments\' najdete v dokumentaciji';
$strUpgrade = '%s bi morali nadgraditi v verzijo %s ali novejšo.';
$strUsage = 'Uporaba';
$strUseBackquotes = 'Obdaj imena tabel in polj z enojnimi poševnimi narekovaji';
$strUseHostTable = 'Uporabi tabelo gostiteljev';
$strUserAlreadyExists = 'Uporabnik %s že obstaja!';
$strUserEmpty = 'Uporabniško ime je prazno!';
$strUserName = 'Uporabniško ime';
$strUserNotFound = 'Izbranega uporabnika v tabelah privilegijev nisem našel.';
$strUserOverview = 'Pregled uporabnikov';
$strUsersDeleted = 'Uspešno sem izbrisal izbrane uporabnike.';
$strUsersHavingAccessToDb = 'Uporabniški dostop do &quot;%s&quot;';
$strUser = 'Uporabnik';
$strUseTables = 'Uporabi tabele';
$strUseTextField = 'Uporabi tekstovno polje';
$strUseThisValue = 'Uporabi to vrednost';

$strValidateSQL = 'Preveri pravilnost SQL stavka';
$strValidatorError = 'Ne morem inicializirati SQL validatorja. Prosim preverite, če so nameščeni vsi php razširitve, kot je navedeno v %dokumenaciji%.';
$strValue = 'Vrednost';
$strVar = 'Spremenljivka';
$strViewDumpDatabases = 'Pokaži povzetek stanja podatkovnih baz';
$strViewDumpDB = 'Preglej povzetek stanja podatkovne baze';
$strViewDump = 'Preglej povzetek stanja tabele';

$strWebServerUploadDirectoryError = 'Imenik, ki ste ga določili za nalaganje, je nedosegljiv';
$strWebServerUploadDirectory = 'imenik za nalaganje datotek';
$strWelcome = 'Dobrodošli v %s';
$strWestEuropean = 'Zahodno evropsko';
$strWildcard = 'nadomestni znak';
$strWindowNotFound = 'Ciljnega okna ni bilo mogoče osvežiti. Morda ste zaprli nadrejeno okno ali pa vaš brskalnik blokira osveževanje varnostnih parametrov med okni.';
$strWithChecked = 'Z označenim:';
$strWrongUser = 'Napačno uporabniško ime/geslo. Dostop zavrnjen.';

$strXML = 'XML';

$strYes = 'Da';

$strZeroRemovesTheLimit = 'Obvestilo: Če postavite vrednost na 0 (nič), boste odstranili omejitev.';
$strZip = '"zipano"';

// To translate:
$strAccessDeniedCreateConfig = 'Probably reason of this is that you did not create configuration file. You might want to use %1$ssetup script%2$s to create one.';  //to translate
$strAddFields = 'Add %s field(s)';  //to translate
$strAfterInsertNext = 'Edit next row';  //to translate
$strAllowInterrupt = 'Allow interrupt of import in case script detects it is close to time limit. This might be good way to import large files, however it can break transactions.';  //to translate
$strAndThen = 'and then';  //to translate
$strApproximateCount = 'May be approximate. See FAQ 3.11';  //to translate

$strBinaryLog = 'Binary log';  //to translate
$strBinLogEventType = 'Event type';  //to translate
$strBinLogInfo = 'Information';  //to translate
$strBinLogName = 'Log name';  //to translate
$strBinLogOriginalPosition = 'Original position';  //to translate
$strBinLogPosition = 'Position';  //to translate
$strBinLogServerId = 'Server ID';  //to translate
$strBookmarkCreated = 'Bookmark %s created';  //to translate
$strBookmarkReplace = 'Replace existing bookmark of same name';  //to translate
$strBrowseDistinctValues = 'Browse distinct values';  //to translate
$strBufferPoolActivity = 'Buffer Pool Activity';  //to translate
$strBufferPool = 'Buffer Pool';  //to translate
$strBufferPoolUsage = 'Buffer Pool Usage';  //to translate
$strBufferReadMissesInPercent = 'Read misses in %';  //to translate
$strBufferReadMisses = 'Read misses';  //to translate
$strBufferWriteWaitsInPercent = 'Write waits in %';  //to translate
$strBufferWriteWaits = 'Write waits';  //to translate
$strBusyPages = 'Busy pages';  //to translate

$strCanNotLoadImportPlugins = 'Could not load import plugins, please check your installation!';  //to translate
$strCompatibleHashing = 'MySQL&nbsp;4.0 compatible';  //to translate
$strCompressionWillBeDetected = 'Imported file compression will be automatically detected from: %s';  //to translate
$strConfigDefaultFileError = 'Could not load default configuration from: "%1$s"';  //to translate
$strCopy = 'Copy';  //to translate
$strCopyDatabaseOK = 'Database %s has been copied to %s';  //to translate
$strCreateDatabaseBeforeCopying = 'CREATE DATABASE before copying';  //to translate
$strCSV = 'CSV';  //to translate

$strDataPages = 'Pages containing data';  //to translate
$strDBCopy = 'Copy database to';  //to translate
$strDefaultEngine = '%s is the default storage engine on this MySQL server.';  //to translate
$strDefragment = 'Defragment table';  //to translate
$strDeleteNoUsersSelected = 'No users selected for deleting!';  //to translate
$strDirtyPages = 'Dirty pages';  //to translate
$strDisableForeignChecks = 'Disable foreign key checks';  //to translate

$strEngineAvailable = '%s is available on this MySQL server.';  //to translate
$strEngineDisabled = '%s has been disabled for this MySQL server.';  //to translate
$strEngines = 'Engines';  //to translate
$strEngineUnsupported = 'This MySQL server does not support the %s storage engine.';  //to translate
$strErrorInZipFile = 'Error in ZIP archive:';  //to translate
$strEscapeWildcards = 'Wildcards _ and % should be escaped with a \ to use them literally';  //to translate
$strEsperanto = 'Esperanto';  //to translate

$strFileNameTemplateDescriptionDatabase = 'database name';  //to translate
$strFileNameTemplateDescriptionServer = 'server name';  //to translate
$strFileNameTemplateDescriptionTable = 'table name';  //to translate
$strFileNameTemplateDescription = 'This value is interpreted using %1$sstrftime%2$s, so you can use time formatting strings. Additionally the following transformations will happen: %3$s. Other text will be kept as is.';  //to translate
$strFileToImport = 'File to import';  //to translate
$strFlushQueryCache = 'Flush query cache';  //to translate
$strFlushTables = 'Flush (close) all tables';  //to translate
$strFreePages = 'Free pages';  //to translate

$strGenerate = 'Generate';  //to translate
$strGeneratePassword = 'Generate Password';  //to translate

$strHandler = 'Handler';  //to translate
$strHTMLExcel = 'Microsoft Excel 2000';  //to translate
$strHTMLWord = 'Microsoft Word 2000';  //to translate

$strIcelandic = 'Icelandic';  //to translate
$strIgnoreDuplicates = 'Ignore duplicate rows';  //to translate
$strImportFormat = 'Format of imported file';  //to translate
$strImport = 'Import';  //to translate
$strImportSuccessfullyFinished = 'Import has been successfully finished, %d queries executed.';  //to translate
$strIndexWarningTable = 'Problems with indexes of table `%s`';//to translate
$strInnoDBAutoextendIncrement = 'Autoextend increment';  //to translate
$strInnoDBAutoextendIncrementDesc = ' The increment size for extending the size of an autoextending tablespace when it becomes full.';  //to translate
$strInnoDBBufferPoolSize = 'Buffer pool size';  //to translate
$strInnoDBBufferPoolSizeDesc = 'The size of the memory buffer InnoDB uses to cache data and indexes of its tables.';  //to translate
$strInnoDBDataFilePath = 'Data files';  //to translate
$strInnoDBDataHomeDir = 'Data home directory';  //to translate
$strInnoDBDataHomeDirDesc = 'The common part of the directory path for all InnoDB data files.';  //to translate
$strInnoDBPages = 'pages';  //to translate
$strInvalidAuthMethod = 'Invalid authentication method set in configuration:';  //to translate
$strInvalidColumnCount = 'Column count has to be larger than zero.';  //to translate
$strInvalidColumn = 'Invalid column (%s) specified!';  //to translate
$strInvalidCSVFieldCount = 'Invalid field count in CSV input on line %d.';  //to translate
$strInvalidCSVFormat = 'Invalid format of CSV input on line %d.';  //to translate
$strInvalidCSVParameter = 'Invalid parameter for CSV import: %s';  //to translate
$strInvalidFieldAddCount = 'You have to add at least one field.';  //to translate
$strInvalidFieldCount = 'Table must have at least one field.';  //to translate
$strInvalidLDIImport = 'This plugin does not support compressed imports!';  //to translate
$strInvalidRowNumber = '%d is not valid row number.';  //to translate
$strInvalidServerHostname = 'Invalid hostname for server %1$s. Please review your configuration.';  //to translate
$strInvalidServerIndex = 'Invalid server index: "%s"';  //to translate

$strJoins = 'Joins';  //to translate

$strKeyCache = 'Key cache';  //to translate

$strLanguageUnknown = 'Unknown language: %1$s.';  //to translate
$strLatchedPages = 'Latched pages';  //to translate
$strLatvian = 'Latvian';  //to translate
$strLDI = 'CSV using LOAD DATA';  //to translate
$strLDILocal = 'Use LOCAL keyword';  //to translate
$strLongOperation = 'This operation could be long. Proceed anyway?';  //to translate

$strMaxConnects = 'max. concurrent connections';  //to translate
$strMaximalQueryLength = 'Maximal length of created query';  //to translate
$strMbExtensionMissing = 'The mbstring PHP extension was not found and you seem to be using multibyte charset. Without mbstring extension phpMyAdmin is unable to split strings correctly and it may result in unexpected results.';  //to translate
$strMbOverloadWarning = 'You have enabled mbstring.func_overload in your PHP configuration. This option is incompatible with phpMyAdmin and might cause breaking of some data!';  //to translate
$strMyISAMDataPointerSize = 'Data pointer size';  //to translate
$strMyISAMDataPointerSizeDesc = 'The default pointer size in bytes, to be used by CREATE TABLE for MyISAM tables when no MAX_ROWS option is specified.';  //to translate
$strMyISAMMaxExtraSortFileSizeDesc = 'If the temporary file used for fast MyISAM index creation would be larger than using the key cache by the amount specified here, prefer the key cache method.';  //to translate
$strMyISAMMaxExtraSortFileSize = 'Maximum size for temporary files on index creation';  //to translate
$strMyISAMMaxSortFileSizeDesc = 'The maximum size of the temporary file MySQL is allowed to use while re-creating a MyISAM index (during REPAIR TABLE, ALTER TABLE, or LOAD DATA INFILE).';  //to translate
$strMyISAMMaxSortFileSize = 'Maximum size for temporary sort files';  //to translate
$strMyISAMRecoverOptions = 'Automatic recovery mode';  //to translate
$strMyISAMRecoverOptionsDesc = 'The mode for automatic recovery of crashed MyISAM tables, as set via the --myisam-recover server startup option.';  //to translate
$strMyISAMRepairThreadsDesc = 'If this value is greater than 1, MyISAM table indexes are created in parallel (each index in its own thread) during the Repair by sorting process.';  //to translate
$strMyISAMRepairThreads = 'Repair threads';  //to translate
$strMyISAMSortBufferSizeDesc = 'The buffer that is allocated when sorting MyISAM indexes during a REPAIR TABLE or when creating indexes with CREATE INDEX or ALTER TABLE.';  //to translate
$strMyISAMSortBufferSize = 'Sort buffer size';  //to translate
$strMysqlClientVersion = 'MySQL client version';  //to translate
$strMySQLConnectionCollation = 'MySQL connection collation';  //to translate

$strNoActivity = 'No activity since %s seconds or more, please login again';  //to translate
$strNoDetailsForEngine = 'There is no detailed status information available for this storage engine.';  //to translate
$strNoFilesFoundInZip = 'No files found inside ZIP archive!';  //to translate
$strNoRowsSelected = 'No rows selected';  //to translate
$strNoThemeSupport = 'No themes support, please check your configuration and/or your themes in directory %s.';  //to translate
$strNumberOfFields = 'Number of fields';  //to translate

$strOpenNewWindow = 'Open new phpMyAdmin window';  //to translate

$strPagesToBeFlushed = 'Pages to be flushed';  //to translate
$strPartialImport = 'Partial import';  //to translate
$strPasswordHashing = 'Password Hashing';  //to translate
$strPDF = 'PDF';  //to translate
$strPDFReportTitle = 'Report title';  //to translate
$strPersian = 'Persian';  //to translate
$strPolish = 'Polish';  //to translate
$strPrivDescAlterRoutine = 'Allows altering and dropping stored routines.';  //to translate
$strPrivDescCreateRoutine = 'Allows creating stored routines.';  //to translate
$strPrivDescCreateUser = 'Allows creating, dropping and renaming user accounts.';  //to translate
$strPrivDescCreateView = 'Allows creating new views.';  //to translate
$strPrivDescExecute5 = 'Allows executing stored routines.';  //to translate
$strPrivDescMaxUserConnections = 'Limits the number of simultaneous connections the user may have.';  //to translate
$strPrivDescShowView = 'Allows performing SHOW CREATE VIEW queries.';  //to translate
$strProtocolVersion = 'Protocol version';  //to translate

$strQueryCache = 'Query cache';  //to translate

$strReadRequests = 'Read requests';  //to translate
$strRefresh = 'Refresh';  //to translate
$strReloadPrivileges = 'Reload privileges';  //to translate
$strReplication = 'Replication';  //to translate
$strRomanian = 'Romanian';  //to translate
$strRunSQLQueryOnServer = 'Run SQL query/queries on server %s';  //to translate

$strSelectBinaryLog = 'Select binary log to view';  //to translate
$strServerNotResponding = 'The server is not responding';  //to translate
$strServerStatusDelayedInserts = 'Delayed inserts';  //to translate
$strShowingBookmark = 'Showing bookmark';  //to translate
$strShowOpenTables = 'Show open tables';  //to translate
$strShowSlaveHosts = 'Show slave hosts';  //to translate
$strShowSlaveStatus = 'Show slave status';  //to translate
$strShowStatusBinlog_cache_disk_useDescr = 'The number of transactions that used the temporary binary log cache but that exceeded the value of binlog_cache_size and used a temporary file to store statements from the transaction.';  //to translate
$strShowStatusBinlog_cache_useDescr = 'The number of transactions that used the temporary binary log cache.';  //to translate
$strShowStatusCreated_tmp_disk_tablesDescr = 'The number of temporary tables on disk created automatically by the server while executing statements. If Created_tmp_disk_tables is big, you may want to increase the tmp_table_size  value to cause temporary tables to be memory-based instead of disk-based.';  //to translate
$strShowStatusCreated_tmp_filesDescr = 'How many temporary files mysqld has created.';  //to translate
$strShowStatusCreated_tmp_tablesDescr = 'The number of in-memory temporary tables created automatically by the server while executing statements.';  //to translate
$strShowStatusDelayed_errorsDescr = 'The number of rows written with INSERT DELAYED for which some error occurred (probably duplicate key).';  //to translate
$strShowStatusDelayed_insert_threadsDescr = 'The number of INSERT DELAYED handler threads in use. Every different table on which one uses INSERT DELAYED gets its own thread.';  //to translate
$strShowStatusDelayed_writesDescr = 'The number of INSERT DELAYED rows written.';  //to translate
$strShowStatusFlush_commandsDescr  = 'The number of executed FLUSH statements.';  //to translate
$strShowStatusHandler_commitDescr = 'The number of internal COMMIT statements.';  //to translate
$strShowStatusHandler_deleteDescr = 'The number of times a row was deleted from a table.';  //to translate
$strShowStatusHandler_discoverDescr = 'The MySQL server can ask the NDB Cluster storage engine if it knows about a table with a given name. This is called discovery. Handler_discover indicates the number of time tables have been discovered.';  //to translate
$strShowStatusHandler_read_firstDescr = 'The number of times the first entry was read from an index. If this is high, it suggests that the server is doing a lot of full index scans; for example, SELECT col1 FROM foo, assuming that col1 is indexed.';  //to translate
$strShowStatusHandler_read_keyDescr = 'The number of requests to read a row based on a key. If this is high, it is a good indication that your queries and tables are properly indexed.';  //to translate
$strShowStatusHandler_read_nextDescr = 'The number of requests to read the next row in key order. This is incremented if you are querying an index column with a range constraint or if you are doing an index scan.';  //to translate
$strShowStatusHandler_read_prevDescr = 'The number of requests to read the previous row in key order. This read method is mainly used to optimize ORDER BY ... DESC.';  //to translate
$strShowStatusHandler_read_rndDescr = 'The number of requests to read a row based on a fixed position. This is high if you are doing a lot of queries that require sorting of the result. You probably have a lot of queries that require MySQL to scan whole tables or you have joins that don\'t use keys properly.';  //to translate
$strShowStatusHandler_read_rnd_nextDescr = 'The number of requests to read the next row in the data file. This is high if you are doing a lot of table scans. Generally this suggests that your tables are not properly indexed or that your queries are not written to take advantage of the indexes you have.';  //to translate
$strShowStatusHandler_rollbackDescr = 'The number of internal ROLLBACK statements.';  //to translate
$strShowStatusHandler_updateDescr = 'The number of requests to update a row in a table.';  //to translate
$strShowStatusHandler_writeDescr = 'The number of requests to insert a row in a table.';  //to translate
$strShowStatusInnodb_buffer_pool_pages_dataDescr = 'The number of pages containing data (dirty or clean).';  //to translate
$strShowStatusInnodb_buffer_pool_pages_dirtyDescr = 'The number of pages currently dirty.';  //to translate
$strShowStatusInnodb_buffer_pool_pages_flushedDescr = 'The number of buffer pool pages that have been requested to be flushed.';  //to translate
$strShowStatusInnodb_buffer_pool_pages_freeDescr = 'The number of free pages.';  //to translate
$strShowStatusInnodb_buffer_pool_pages_latchedDescr = 'The number of latched pages in InnoDB buffer pool. These are pages currently being read or written or that can\'t be flushed or removed for some other reason.';  //to translate
$strShowStatusInnodb_buffer_pool_pages_miscDescr = 'The number of pages busy because they have been allocated for administrative overhead such as row locks or the adaptive hash index. This value can also be calculated as Innodb_buffer_pool_pages_total - Innodb_buffer_pool_pages_free - Innodb_buffer_pool_pages_data.';  //to translate
$strShowStatusInnodb_buffer_pool_pages_totalDescr = 'Total size of buffer pool, in pages.';  //to translate
$strShowStatusInnodb_buffer_pool_read_ahead_rndDescr = 'The number of "random" read-aheads InnoDB initiated. This happens when a query is to scan a large portion of a table but in random order.';  //to translate
$strShowStatusInnodb_buffer_pool_read_ahead_seqDescr = 'The number of sequential read-aheads InnoDB initiated. This happens when InnoDB does a sequential full table scan.';  //to translate
$strShowStatusInnodb_buffer_pool_read_requestsDescr = 'The number of logical read requests InnoDB has done.';  //to translate
$strShowStatusInnodb_buffer_pool_readsDescr = 'The number of logical reads that InnoDB could not satisfy from buffer pool and had to do a single-page read.';  //to translate
$strShowStatusInnodb_buffer_pool_wait_freeDescr = 'Normally, writes to the InnoDB buffer pool happen in the background. However, if it\'s necessary to read or create a page and no clean pages are available, it\'s necessary to wait for pages to be flushed first. This counter counts instances of these waits. If the buffer pool size was set properly, this value should be small.';  //to translate
$strShowStatusInnodb_buffer_pool_write_requestsDescr = 'The number writes done to the InnoDB buffer pool.';  //to translate
$strShowStatusInnodb_data_fsyncsDescr = 'The number of fsync() operations so far.';  //to translate
$strShowStatusInnodb_data_pending_fsyncsDescr = 'The current number of pending fsync() operations.';  //to translate
$strShowStatusInnodb_data_pending_readsDescr = 'The current number of pending reads.';  //to translate
$strShowStatusInnodb_data_pending_writesDescr = 'The current number of pending writes.';  //to translate
$strShowStatusInnodb_data_readDescr = 'The amount of data read so far, in bytes.';  //to translate
$strShowStatusInnodb_data_readsDescr = 'The total number of data reads.';  //to translate
$strShowStatusInnodb_data_writesDescr = 'The total number of data writes.';  //to translate
$strShowStatusInnodb_data_writtenDescr = 'The amount of data written so far, in bytes.';  //to translate
$strShowStatusInnodb_dblwr_pages_writtenDescr = 'The number of doublewrite writes that have been performed and the number of pages that have been written for this purpose.';  //to translate
$strShowStatusInnodb_dblwr_writesDescr = 'The number of doublewrite writes that have been performed and the number of pages that have been written for this purpose.';  //to translate
$strShowStatusInnodb_log_waitsDescr = 'The number of waits we had because log buffer was too small and we had to wait for it to be flushed before continuing.';  //to translate
$strShowStatusInnodb_log_write_requestsDescr = 'The number of log write requests.';  //to translate
$strShowStatusInnodb_log_writesDescr = 'The number of physical writes to the log file.';  //to translate
$strShowStatusInnodb_os_log_fsyncsDescr = 'The number of fsyncs writes done to the log file.';  //to translate
$strShowStatusInnodb_os_log_pending_fsyncsDescr = 'The number of pending log file fsyncs.';  //to translate
$strShowStatusInnodb_os_log_pending_writesDescr = 'Pending log file writes.';  //to translate
$strShowStatusInnodb_os_log_writtenDescr = 'The number of bytes written to the log file.';  //to translate
$strShowStatusInnodb_pages_createdDescr = 'The number of pages created.';  //to translate
$strShowStatusInnodb_page_sizeDescr = 'The compiled-in InnoDB page size (default 16KB). Many values are counted in pages; the page size allows them to be easily converted to bytes.';  //to translate
$strShowStatusInnodb_pages_readDescr = 'The number of pages read.';  //to translate
$strShowStatusInnodb_pages_writtenDescr = 'The number of pages written.';  //to translate
$strShowStatusInnodb_row_lock_current_waitsDescr = 'The number of row locks currently being waited for.';  //to translate
$strShowStatusInnodb_row_lock_time_avgDescr = 'The average time to acquire a row lock, in milliseconds.';  //to translate
$strShowStatusInnodb_row_lock_timeDescr = 'The total time spent in acquiring row locks, in milliseconds.';  //to translate
$strShowStatusInnodb_row_lock_time_maxDescr = 'The maximum time to acquire a row lock, in milliseconds.';  //to translate
$strShowStatusInnodb_row_lock_waitsDescr = 'The number of times a row lock had to be waited for.';  //to translate
$strShowStatusInnodb_rows_deletedDescr = 'The number of rows deleted from InnoDB tables.';  //to translate
$strShowStatusInnodb_rows_insertedDescr = 'The number of rows inserted in InnoDB tables.';  //to translate
$strShowStatusInnodb_rows_readDescr = 'The number of rows read from InnoDB tables.';  //to translate
$strShowStatusInnodb_rows_updatedDescr = 'The number of rows updated in InnoDB tables.';  //to translate
$strShowStatusKey_blocks_not_flushedDescr = 'The number of key blocks in the key cache that have changed but haven\'t yet been flushed to disk. It used to be known as Not_flushed_key_blocks.';  //to translate
$strShowStatusKey_blocks_unusedDescr = 'The number of unused blocks in the key cache. You can use this value to determine how much of the key cache is in use.';  //to translate
$strShowStatusKey_blocks_usedDescr = 'The number of used blocks in the key cache. This value is a high-water mark that indicates the maximum number of blocks that have ever been in use at one time.';  //to translate
$strShowStatusKey_read_requestsDescr = 'The number of requests to read a key block from the cache.';  //to translate
$strShowStatusKey_readsDescr = 'The number of physical reads of a key block from disk. If Key_reads is big, then your key_buffer_size value is probably too small. The cache miss rate can be calculated as Key_reads/Key_read_requests.';  //to translate
$strShowStatusKey_write_requestsDescr = 'The number of requests to write a key block to the cache.';  //to translate
$strShowStatusKey_writesDescr = 'The number of physical writes of a key block to disk.';  //to translate
$strShowStatusLast_query_costDescr = 'The total cost of the last compiled query as computed by the query optimizer. Useful for comparing the cost of different query plans for the same query. The default value of 0 means that no query has been compiled yet.';  //to translate
$strShowStatusNot_flushed_delayed_rowsDescr = 'The number of rows waiting to be written in INSERT DELAYED queues.';  //to translate
$strShowStatusOpened_tablesDescr = 'The number of tables that have been opened. If opened tables is big, your table cache value is probably too small.';  //to translate
$strShowStatusOpen_filesDescr = 'The number of files that are open.';  //to translate
$strShowStatusOpen_streamsDescr = 'The number of streams that are open (used mainly for logging).';  //to translate
$strShowStatusOpen_tablesDescr = 'The number of tables that are open.';  //to translate
$strShowStatusQcache_free_blocksDescr = 'The number of free memory blocks in query cache.';  //to translate
$strShowStatusQcache_free_memoryDescr = 'The amount of free memory for query cache.';  //to translate
$strShowStatusQcache_hitsDescr = 'The number of cache hits.';  //to translate
$strShowStatusQcache_insertsDescr = 'The number of queries added to the cache.';  //to translate
$strShowStatusQcache_lowmem_prunesDescr = 'The number of queries that have been removed from the cache to free up memory for caching new queries. This information can help you tune the query cache size. The query cache uses a least recently used (LRU) strategy to decide which queries to remove from the cache.';  //to translate
$strShowStatusQcache_not_cachedDescr = 'The number of non-cached queries (not cachable, or not cached due to the query_cache_type setting).';  //to translate
$strShowStatusQcache_queries_in_cacheDescr = 'The number of queries registered in the cache.';  //to translate
$strShowStatusQcache_total_blocksDescr = 'The total number of blocks in the query cache.';  //to translate
$strShowStatusReset = 'Reset';  //to translate
$strShowStatusRpl_statusDescr = 'The status of failsafe replication (not yet implemented).';  //to translate
$strShowStatusSelect_full_joinDescr = 'The number of joins that do not use indexes. If this value is not 0, you should carefully check the indexes of your tables.';  //to translate
$strShowStatusSelect_full_range_joinDescr = 'The number of joins that used a range search on a reference table.';  //to translate
$strShowStatusSelect_range_checkDescr = 'The number of joins without keys that check for key usage after each row. (If this is not 0, you should carefully check the indexes of your tables.)';  //to translate
$strShowStatusSelect_rangeDescr = 'The number of joins that used ranges on the first table. (It\'s normally not critical even if this is big.)';  //to translate
$strShowStatusSelect_scanDescr = 'The number of joins that did a full scan of the first table.';  //to translate
$strShowStatusSlave_open_temp_tablesDescr = 'The number of temporary tables currently open by the slave SQL thread.';  //to translate
$strShowStatusSlave_retried_transactionsDescr = 'Total (since startup) number of times the replication slave SQL thread has retried transactions.';  //to translate
$strShowStatusSlave_runningDescr = 'This is ON if this server is a slave that is connected to a master.';  //to translate
$strShowStatusSlow_launch_threadsDescr = 'The number of threads that have taken more than slow_launch_time seconds to create.';  //to translate
$strShowStatusSlow_queriesDescr = 'The number of queries that have taken more than long_query_time seconds.';  //to translate
$strShowStatusSort_merge_passesDescr = 'The number of merge passes the sort algorithm has had to do. If this value is large, you should consider increasing the value of the sort_buffer_size system variable.';  //to translate
$strShowStatusSort_rangeDescr = 'The number of sorts that were done with ranges.';  //to translate
$strShowStatusSort_rowsDescr = 'The number of sorted rows.';  //to translate
$strShowStatusSort_scanDescr = 'The number of sorts that were done by scanning the table.';  //to translate
$strShowStatusTable_locks_immediateDescr = 'The number of times that a table lock was acquired immediately.';  //to translate
$strShowStatusTable_locks_waitedDescr = 'The number of times that a table lock could not be acquired immediately and a wait was needed. If this is high, and you have performance problems, you should first optimize your queries, and then either split your table or tables or use replication.';  //to translate
$strShowStatusThreads_cachedDescr = 'The number of threads in the thread cache. The cache hit rate can be calculated as Threads_created/Connections. If this value is red you should raise your thread_cache_size.';  //to translate
$strShowStatusThreads_connectedDescr = 'The number of currently open connections.';  //to translate
$strShowStatusThreads_createdDescr = 'The number of threads created to handle connections. If Threads_created is big, you may want to increase the thread_cache_size value. (Normally this doesn\'t give a notable performance improvement if you have a good thread implementation.)';  //to translate
$strShowStatusThreads_runningDescr = 'The number of threads that are not sleeping.';  //to translate
$strSkipQueries = 'Number of records(queries) to skip from start';  //to translate
$strSlovak = 'Slovak';  //to translate
$strSlovenian = 'Slovenian';  //to translate
$strSocketProblem = '(or the local MySQL server\'s socket is not correctly configured)';  //to translate
$strSorting = 'Sorting';  //to translate
$strSpanish = 'Spanish';  //to translate
$strSQLCompatibility = 'SQL compatibility mode';  //to translate
$strStatisticsOverrun = 'On a busy server, the byte counters may overrun, so those statistics as reported by the MySQL server may be incorrect.';  //to translate
$strStorageEngines = 'Storage Engines';  //to translate
$strStorageEngine = 'Storage Engine';  //to translate
$strStrucNativeExcel = 'Native MS Excel data';  //to translate
$strSwitchToDatabase = 'Switch to copied database';  //to translate

$strTableAlreadyExists = 'Table %s already exists!';  //to translate
$strTakeIt = 'take it';  //to translate
$strTempData = 'Temporary data';  //to translate
$strThemeDefaultNotFound = 'Default theme %s not found!';  //to translate
$strThemeNoPreviewAvailable = 'No preview available.';  //to translate
$strThemeNotFound = 'Theme %s not found!';  //to translate
$strThemeNoValidImgPath = 'No valid image path for theme %s found!';  //to translate
$strThemePathNotFound = 'Theme path not found for theme %s!';  //to translate
$strTheme = 'Theme / Style';  //to translate
$strThreads = 'Threads';  //to translate
$strTimeoutInfo = 'Previous import timed out, after resubmitting will continue from position %d.';  //to translate
$strTimeoutNothingParsed = 'However on last run no data has been parsed, this usually means phpMyAdmin won\'t be able to finish this import unless you increase php time limits.';  //to translate
$strTimeoutPassed = 'Script timeout passed, if you want to finish import, please resubmit same file and import will resume.';  //to translate
$strTraditionalSpanish = 'Traditional Spanish';  //to translate
$strTransactionCoordinator = 'Transaction coordinator';  //to translate
$strTransformation_application_octetstream__hex = 'Displays hexadecimal representation of data. Optional first parameter specifies how often space will be added (defaults to 2 nibbles).';  //to translate
$strTransformation_text_plain__sql = 'Formats text as SQL query with syntax highlighting.';  //to translate

$strUnsupportedCompressionDetected = 'You attempted to load file with unsupported compression (%s). Either support for it is not implemented or disabled by your configuration.';  //to translate
$strUploadLimit = 'You probably tried to upload too large file. Please refer to %sdocumentation%s for ways to workaround this limit.';  //to translate
$strUseTabKey = 'Use TAB key to move from value to value, or CTRL+arrows to move anywhere';  //to translate

$strVersionInformation = 'Version information';  //to translate
$strViewHasBeenDropped = 'View %s has been dropped';  //to translate
$strView = 'View';  //to translate

$strWriteRequests = 'Write requests';  //to translate

$strQueryResultsOperations = 'Query results operations';  //to translate
$strAddClause = 'Add %s';  //to translate
$strUploadsNotAllowed = 'File uploads are not allowed on this server.';  //to translate
$strOpenDocumentSpreadsheet = 'Open Document Spreadsheet';  //to translate
$strExportMustBeFile = 'Selected export type has to be saved in file!';  //to translate
$strCreateUserDatabase = 'Database for user';  //to translate
$strCreateUserDatabaseNone = 'None';  //to translate
$strCreateUserDatabaseName = 'Create database with same name and grant all privileges';  //to translate
$strCreateUserDatabaseWildcard = 'Grant all privileges on wildcard name (username\_%)';  //to translate
$strOpenDocumentText = 'Open Document Text';  //to translate
$strNoDataReceived = 'No data was received to import. Either no file name was submitted, or the file size exceeded the maximum size permitted by your PHP configuration. See FAQ 1.16.';  //to translate
$strCanNotLoadExportPlugins = 'Could not load export plugins, please check your installation!';  //to translate
$strErrorRenamingTable = 'Error renaming table %1$s to %2$s';  //to translate
$strInvalidTableName = 'Invalid table name';  //to translate
$strInvalidDatabase = 'Invalid database';  //to translate
$strServers = 'Servers';  //to translate
$strDelimiter = 'Delimiter';  //to translate
$strFunctions = 'Functions';  //to translate
$strProcedures = 'Procedures';  //to translate
$strPDFReportExplanation = '(Generates a report containing the data of a single table)';  //to translate
$strFontSize = 'Font size';  //to translate
$strLanguage = 'Language';  //to translate
$strTransformation_text_plain__dateformat = 'Displays a TIME, TIMESTAMP, DATETIME or numeric unix timestamp field as formatted date. The first option is the offset (in hours) which will be added to the timestamp (Default: 0). Use second option to specify a different date/time format string. Third option determines whether you want to see local date or UTC one (use "local" or "utc" strings) for that. According to that, date format has different value - for "local" see the documentation for PHP\'s strftime() function and for "utc" it is done using gmdate() function.';  //to translate
$strDocSQL = 'DocSQL';  //to translate
$strTableName = 'Table name';  //to translate
$strTableIsEmpty = 'Table seems to be empty!';  //to translate
$strDbIsEmpty = 'Database seems to be empty!';  //to translate
$strShowingPhp = 'Showing as PHP code';  //to translate
$strShowingSQL = 'Showing SQL query';  //to translate
$strDesigner = 'Designer';  //to translate
$strNumberOfTables = 'Number of tables';  //to translate
$strCreateTable  = 'Create table';  //to translate
$strCreateRelation = 'Create relation';  //to translate
$strSavePosition = 'Save position';  //to translate
$strSelectForeignKey = 'Select Foreign Key';  //to translate
$strHide         = 'Hide';  //to translate
$strShowHideLeftMenu = 'Show/Hide left menu';  //to translate
$strReload = 'Reload';  //to translate
$strSmallBigAll = 'Small/Big All';  //to translate
$strImportExportCoords = 'Import/Export coordinates for PDF schema';  //to translate
$strMoveMenu = 'Move Menu';  //to translate
$strAngularLinks = 'Angular links';  //to translate
$strDirectLinks = 'Direct links';  //to translate
$strHideShowAll = 'Hide/Show all';  //to translate
$strHideShowNoRelation = 'Hide/Show Tables with no relation';  //to translate
$strInternalRelationAdded = 'Internal relation added';  //to translate
$strRelationDeleted = 'Relation deleted';  //to translate
$strToSelectRelation = 'To select relation, click :';  //to translate
$strExportImportToScale = 'Export/Import to scale';  //to translate
$strRecommended = 'recommended';  //to translate
$strToFromPage = 'to/from page';  //to translate
$strSelectReferencedKey = 'Select referenced key';  //to translate
$strPleaseSelectPrimaryOrUniqueKey = 'Please select the primary key or a unique key';  //to translate
$strHelp = 'Help';  //to translate
$strCancel = 'Cancel';  //to translate
$strDeleteRelation = 'Delete relation';  //to translate
$strKnownExternalBug = 'The %s functionality is affected by a known bug, see %s';  //to translate
$strStructureForView = 'Structure for view';  //to translate
$strStandInStructureForView = 'Stand-in structure for view';  //to translate
$strToggleSmallBig = 'Toggle small/big';  //to translate
$strIEUnsupported = 'Internet Explorer does not support this function.';  //to translate
$strErrorRelationAdded = 'Error: Relation not added.';  //to translate
$strErrorRelationExists = 'Error: relation already exists.';  //to translate
$strErrorSaveTable = 'Error saving coordinates for Designer.';  //to translate
$strSnapToGrid = 'Snap to grid';  //to translate
$strDesignerHelpDisplayField = 'The display field is shown in pink. To set/unset a field as the display field, click the "Choose field to display" icon, then click on the appropriate field name.';  //to translate
$strUploadErrorIniSize = 'The uploaded file exceeds the upload_max_filesize directive in php.ini.';  //to translate
$strUploadErrorFormSize = 'The uploaded file exceeds the MAX_FILE_SIZE directive that was specified in the HTML form.';  //to translate
$strUploadErrorPartial = 'The uploaded file was only partially uploaded.';  //to translate
$strUploadErrorNoTempDir = 'Missing a temporary folder.';  //to translate
$strUploadErrorCantWrite = 'Failed to write file to disk.';  //to translate
$strUploadErrorExtension = 'File upload stopped by extension.';  //to translate
$strUploadErrorUnknown = 'Unknown error in file upload.';  //to translate
$strSessionStartupErrorGeneral = 'Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly.';  //to translate
$strFieldInsertFromFileTempDirNotExists = 'Error moving the uploaded file, see FAQ 1.11';  //to translate
$strViewName = 'VIEW name';  //to translate
$strOptions = 'Options';  //to translate
$strFiles = 'Files';  //to translate
$strMysqlLibDiffersServerVersion = 'Your PHP MySQL library version %s differs from your MySQL server version %s. This may cause unpredictable behavior.';  //to translate
$strRoutines = 'Routines';  //to translate
$strRoutineReturnType = 'Return type';  //to translate
$strControluserFailed = 'Connection for controluser as defined in your configuration failed.';  //to translate
$strHexForBLOB = 'Use hexadecimal for BLOB';  //to translate
$strRestartInsertion = 'Restart insertion with %s rows';  //to translate
$strTriggers = 'Triggers';  //to translate
$strEvent = 'Event';  //to translate
$strProfiling = 'Profiling';  //to translate
$strPartitionDefinition = 'PARTITION definition';  //to translate
$strPrivDescTrigger = 'Allows creating and dropping triggers';  //to translate
$strPrivDescEvent = 'Allows to set up events for the event scheduler';  //to translate
$strPrivDescProcess = 'Allows viewing processes of all users';  //to translate
$strPartitioned = 'partitioned';  //to translate
$strTableAlteredSuccessfully = 'Table %1$s has been altered successfully';  //to translate
$strDatabaseHasBeenCreated = 'Database %1$s has been created.';  //to translate
$strTableHasBeenCreated = 'Table %1$s has been created.';  //to translate
$strForeignKeyError = 'Error creating foreign key on %1$s (check data types)';  //to translate
$strRowsDeleted = '%1$d row(s) deleted.';  //to translate
$strRowsAffected = '%1$d row(s) affected.';  //to translate
$strRowsInserted = '%1$d row(s) inserted.';  //to translate
$strInsertedRowId = 'Inserted row id: %1$d';  //to translate
$strIndexesSeemEqual = 'The indexes %1$s and %2$s seem to be equal and one of them could possibly be removed.';  //to translate
$strPartitionMaintenance = 'Partition maintenance';  //to translate
$strPartition = 'Partition %s';  //to translate
$strAnalyze = 'Analyze';  //to translate
$strCheck = 'Check';  //to translate
$strOptimize = 'Optimize';  //to translate
$strRebuild = 'Rebuild';  //to translate
$strRepair = 'Repair';  //to translate
$strRemovePartitioning = 'Remove partitioning';  //to translate
$strSearchInField = 'Inside field:';  //to translate
$strTexyText = 'Texy! text';  //to translate
$strDetails = 'Details...';  //to translate
$strComment = 'Comment';  //to translate
$strPacked = 'Packed';  //to translate
$strActions = 'Actions';  //to translate
$strInterface = 'Interface';  //to translate
$strSuhosin = 'Server running with Suhosin. Please refer to %sdocumentation%s for possible issues.';  //to translate
$strEvents = 'Events';  //to translate
$strForeignKeyRelationAdded = 'FOREIGN KEY relation added';  //to translate
$strInternalAndForeign = 'An internal relation is not necessary when a corresponding FOREIGN KEY relation exists.';  //to translate
$strViewHasAtLeast = 'This view has at least this number of rows. Please refer to %sdocumentation%s.';  //to translate
$strRelationalKey = 'Relational key';  //to translate
$strRelationalDisplayField = 'Relational display field';  //to translate
$strSwekeyNoKey = 'No valid authentication key plugged';  //to translate
$strSwekeyNoKeyId = 'File %s does not contain any key id';  //to translate
$strSwekeyAuthFailed = 'Hardware authentication failed';  //to translate
$strSwekeyAuthenticating = 'Authenticating...';  //to translate
$strPBXTIndexCacheSize = 'Index cache size';  //to translate
$strPBXTRecordCacheSize = 'Record cache size';  //to translate
$strPBXTLogCacheSize = 'Log cache size';  //to translate
$strPBXTLogFileThreshold = 'Log file threshold';  //to translate
$strPBXTTransactionBufferSize = 'Transaction buffer size';  //to translate
$strPBXTCheckpointFrequency = 'Checkpoint frequency';  //to translate
$strPBXTDataLogThreshold = 'Data log threshold';  //to translate
$strPBXTGarbageThreshold = 'Garbage threshold';  //to translate
$strPBXTLogBufferSize = 'Log buffer size';  //to translate
$strPBXTDataFileGrowSize = 'Data file grow size';  //to translate
$strPBXTRowFileGrowSize = 'Row file grow size';  //to translate
$strPBXTRowFileGrowSizeDesc = 'The grow size of the row pointer (.xtr) files.';  //to translate
$strPBXTDataFileGrowSizeDesc = 'The grow size of the handle data (.xtd) files.';  //to translate
$strPBXTLogBufferSizeDesc = 'The size of the buffer used when writing a data log. The default is 256MB. The engine allocates one buffer per thread, but only if the thread is required to write a data log.';  //to translate
$strPBXTGarbageThresholdDesc = 'The percentage of garbage in a data log file before it is compacted. This is a value between 1 and 99. The default is 50.';  //to translate
$strPBXTDataLogThresholdDesc = 'The maximum size of a data log file. The default value is 64MB. PBXT can create a maximum of 32000 data logs, which are used by all tables. So the value of this variable can be increased to increase the total amount of data that can be stored in the database.';  //to translate
$strPBXTCheckpointFrequencyDesc = 'The amount of data written to the transaction log before a checkpoint is performed. The default value is 24MB.';  //to translate
$strPBXTTransactionBufferSizeDesc = 'The size of the global transaction log buffer (the engine allocates 2 buffers of this size). The default is 1MB.';  //to translate
$strPBXTLogFileThresholdDesc = 'The size of a transaction log before rollover, and a new log is created. The default value is 16MB.';  //to translate
$strPBXTLogCacheSizeDesc = 'The amount of memory allocated to the transaction log cache used to cache on transaction log data. The default is 16MB.';  //to translate
$strPBXTRecordCacheSizeDesc = 'This is the amount of memory allocated to the record cache used to cache table data. The default value is 32MB. This memory is used to cache changes to the handle data (.xtd) and row pointer (.xtr) files.';  //to translate
$strPBXTIndexCacheSizeDesc = 'This is the amount of memory allocated to the index cache. Default value is 32MB. The memory allocated here is used only for caching index pages.';  //to translate
$strPBXTLogFileCount = 'Log file count';  //to translate
$strPBXTLogFileCountDesc = 'This is the number of transaction log files (pbxt/system/xlog*.xt) the system will maintain. If the number of logs exceeds this value then old logs will be deleted, otherwise they are renamed and given the next highest number.';  //to translate
$strAsDefined = 'As defined:';  //to translate
$strWiki = 'Wiki';  //to translate
$strWebServer = 'Web server';  //to translate
$strPHPExtension = 'PHP extension';  //to translate
$strCustomColor = 'Custom color';  //to translate
$strBLOBRepository = 'BLOB Repository';  //to translate
$strBLOBRepositoryDamaged = 'Damaged';  //to translate
$strBLOBRepositoryDisableAreYouSure = 'Are you sure you want to disable all BLOB references for database %s?';  //to translate
$strBLOBRepositoryDisabled = 'Disabled';  //to translate
$strBLOBRepositoryDisable = 'Disable';  //to translate
$strBLOBRepositoryDisableStrongWarning = 'You are about to DISABLE a BLOB Repository!';  //to translate
$strBLOBRepositoryEnabled = 'Enabled';  //to translate
$strBLOBRepositoryEnable = 'Enable';  //to translate
$strBLOBRepositoryRemove = 'Remove BLOB Repository Reference';  //to translate
$strBLOBRepositoryRepair = 'Repair';  //to translate
$strBLOBRepositoryStatus = 'Status';  //to translate
$strBLOBRepositoryUpload = 'Upload to BLOB repository';  //to translate
$strViewImage = 'View image';  //to translate
$strPlayAudio = 'Play audio';  //to translate
$strViewVideo = 'View video';  //to translate
$strDownloadFile = 'Download file';  //to translate
$strLogServerHelp = 'You can enter hostname/IP address and port separated by space.';  //to translate
$strShowKeys = 'Only show keys';  //to translate
$strSetupServersAdd = 'Add a new server';  //to translate
$strSetupServersEdit = 'Edit server';  //to translate
$strSetupFormset_features = 'Features';  //to translate
$strSetupFormset_left_frame = 'Customize navigation frame';  //to translate
$strSetupFormset_main_frame = 'Customize main frame';  //to translate
$strSetupFormset_import = 'Customize import defaults';  //to translate
$strSetupFormset_export = 'Customize export options';  //to translate
$strSetupFormset_customization = 'Customization';  //to translate
$strSetupTrue = 'yes';  //to translate
$strSetupFalse = 'no';  //to translate
$strSetupDisplay = 'Display';  //to translate
$strSetupDownload = 'Download';  //to translate
$strSetupClear = 'Clear';  //to translate
$strSetupLoad = 'Load';  //to translate
$strSetupRestoreDefaultValue = 'Restore default value';  //to translate
$strSetupSetValue = 'Set value: %s';  //to translate
$strSetupWarning = 'Warning';  //to translate
$strSetupIgnoreErrors = 'Ignore errors';  //to translate
$strSetupRevertErroneousFields = 'Try to revert erroneous fields to their default values';  //to translate
$strSetupShowForm = 'Show form';  //to translate
$strSetupOverview = 'Overview';  //to translate
$strSetupShowHiddenMessages = 'Show hidden messages (#MSG_COUNT)';  //to translate
$strSetupNoServers = 'There are no configured servers';  //to translate
$strSetupNewServer = 'New server';  //to translate
$strSetupDefaultLanguage = 'Default language';  //to translate
$strSetupDefaultServer = 'Default server';  //to translate
$strSetupLetUserChoose = 'let the user choose';  //to translate
$strSetupOptionNone = '- none -';  //to translate
$strSetupEndOfLine = 'End of line';  //to translate
$strSetupConfigurationFile = 'Configuration file';  //to translate
$strSetupHomepageLink = 'phpMyAdmin homepage';  //to translate
$strSetupDonateLink = 'Donate';  //to translate
$strSetupVersionCheckLink = 'Check for latest version';  //to translate
$strSetupCannotLoadConfig = 'Cannot load or save configuration';  //to translate
$strSetupCannotLoadConfigMsg = 'Please create web server writable folder [em]config[/em] in phpMyAdmin top level directory as described in [a@../Documentation.html#setup_script]documentation[/a]. Otherwise you will be only able to download or display it.';  //to translate
$strSetupInsecureConnection = 'Insecure connection';  //to translate
$strSetupInsecureConnectionMsg2 = 'If your server is also configured to accept HTTPS requests follow [a@%s]this link[/a] to use a secure connection.';  //to translate
$strSetupVersionCheck = 'Version check';  //to translate
$strSetupVersionCheckWrapperError = 'Neither URL wrapper nor CURL is available. Version check is not possible.';  //to translate
$strSetupVersionCheckDataError = 'Reading of version failed. Maybe you\'re offline or the upgrade server does not respond.';  //to translate
$strSetupVersionCheckInvalid = 'Got invalid version string from server';  //to translate
$strSetupVersionCheckUnparsable = 'Unparsable version string';  //to translate
$strSetupVersionCheckNewAvailableSvn = 'You are using subversion version, run [kbd]svn update[/kbd] :-)[br]The latest stable version is %s, released on %s.';  //to translate
$strSetupVersionCheckNone = 'No newer stable version is available';  //to translate
$strSetupServerSecurityInfoMsg = 'If you feel this is necessary, use additional protection settings - [a@?page=servers&amp;mode=edit&amp;id=%1$d#tab_Server_config]host authentication[/a] settings and [a@?page=form&amp;formset=features#tab_Security]trusted proxies list[/a]. However, IP-based protection may not be reliable if your IP belongs to an ISP where thousands of users, including you, are connected to.';  //to translate
$strSetupServerSslMsg = 'You should use SSL connections if your web server supports it';  //to translate
$strSetupServerExtensionMsg = 'You should use mysqli for performance reasons';  //to translate
$strSetupServerNoPasswordRootMsg = 'You allow for connecting to the server as root without a password.';  //to translate
$strSetupBlowfishSecretLengthMsg = 'Key is too short, it should have at least 8 characters';  //to translate
$strSetupForceSSLMsg = 'This [a@?page=form&amp;formset=features#tab_Security]option[/a] should be enabled if your web server supports it';  //to translate
$strSetupAllowArbitraryServerMsg = 'This [a@?page=form&amp;formset=features#tab_Security]option[/a] should be disabled as it allows attackers to bruteforce login to any MySQL server. If you feel this is necessary, use [a@?page=form&amp;formset=features#tab_Security]trusted proxies list[/a]. However, IP-based protection may not be reliable if your IP belongs to an ISP where thousands of users, including you, are connected to.';  //to translate
$strSetupLoginCookieValidityMsg = '[a@?page=form&formset=features#tab_Security]Login cookie validity[/a] should be should be set to 1800 seconds (30 minutes) at most. Values larger than 1800 may pose a security risk such as impersonation.';  //to translate
$strSetupDirectoryNotice = 'This value should be double checked to ensure that this directory is neither world accessible nor readable or writable by other users on your server.';  //to translate
$strSetupGZipDumpWarning = '[a@?page=form&amp;formset=features#tab_Import_export]GZip compression and decompression[/a] requires functions (%s) which are unavailable on this system.';  //to translate
$strSetupBZipDumpWarning = '[a@?page=form&amp;formset=features#tab_Import_export]Bzip2 compression and decompression[/a] requires functions (%s) which are unavailable on this system.';  //to translate
$strSetupZipDumpImportWarning = '[a@?page=form&amp;formset=features#tab_Import_export]Zip decompression[/a] requires functions (%s) which are unavailable on this system.';  //to translate
$strSetupZipDumpExportWarning = '[a@?page=form&amp;formset=features#tab_Import_export]Zip compression[/a] requires functions (%s) which are unavailable on this system.';  //to translate
$strSetuperror_form = 'Submitted form contains errors';  //to translate
$strSetuperror_missing_field_data = 'Missing data for %s';  //to translate
$strSetuperror_incorrect_port = 'Not a valid port number';  //to translate
$strSetuperror_incorrect_value = 'Incorrect value';  //to translate
$strSetuperror_incorrect_ip_address = 'Incorrect IP address: %s';  //to translate
$strSetuperror_nan_p = 'Not a positive number';  //to translate
$strSetuperror_nan_nneg = 'Not a non-negative number';  //to translate
$strSetuperror_empty_pmadb_user = 'Empty phpMyAdmin control user while using pmadb';  //to translate
$strSetuperror_empty_pmadb_password = 'Empty phpMyAdmin control user password while using pmadb';  //to translate
$strSetuperror_empty_user_for_config_auth = 'Empty username while using config authentication method';  //to translate
$strSetuperror_empty_signon_session = 'Empty signon session name while using signon authentication method';  //to translate
$strSetuperror_empty_signon_url = 'Empty signon URL while using signon authentication method';  //to translate
$strSetuperror_connection = 'Could not connect to MySQL server';  //to translate
$strSetupForm_Server = 'Basic settings';  //to translate
$strSetupForm_Server_desc = 'Enter server connection parameters';  //to translate
$strSetupForm_Server_login_options = 'Signon login options';  //to translate
$strSetupForm_Server_login_options_desc = 'Enter login options for signon authentication';  //to translate
$strSetupForm_Server_config = 'Server configuration';  //to translate
$strSetupForm_Server_config_desc = 'Advanced server configuration, do not change these options unless you know what they are for';  //to translate
$strSetupForm_Server_pmadb = 'PMA database';  //to translate
$strSetupForm_Server_pmadb_desc = 'Configure phpMyAdmin database to gain access to additional features, see [a@../Documentation.html#linked-tables]linked-tables infrastructure[/a] in documentation';  //to translate
$strSetupForm_Import_export = 'Import / export';  //to translate
$strSetupForm_Import_export_desc = 'Set import and export directories and compression options';  //to translate
$strSetupForm_Security = 'Security';  //to translate
$strSetupForm_Security_desc = 'Please note that phpMyAdmin is just a user interface and its features do not limit MySQL';  //to translate
$strSetupForm_Sql_queries = 'SQL queries';  //to translate
$strSetupForm_Sql_queries_desc = 'SQL queries settings, for SQL Query box options see [a@?page=form&amp;formset=main_frame#tab_Sql_box]Navigation frame[/a] settings';  //to translate
$strSetupForm_Other_core_settings = 'Other core settings';  //to translate
$strSetupForm_Other_core_settings_desc = 'Settings that didn\'t fit enywhere else';  //to translate
$strSetupForm_Left_frame = 'Navigation frame';  //to translate
$strSetupForm_Left_frame_desc = 'Customize appearance of the navigation frame';  //to translate
$strSetupForm_Left_servers = 'Servers';  //to translate
$strSetupForm_Left_servers_desc = 'Servers display options';  //to translate
$strSetupForm_Left_databases = 'Databases';  //to translate
$strSetupForm_Left_databases_desc = 'Databases display options';  //to translate
$strSetupForm_Left_tables = 'Tables';  //to translate
$strSetupForm_Left_tables_desc = 'Tables display options';  //to translate
$strSetupForm_Main_frame = 'Main frame';  //to translate
$strSetupForm_Startup = 'Startup';  //to translate
$strSetupForm_Startup_desc = 'Customize startup page';  //to translate
$strSetupForm_Browse = 'Browse mode';  //to translate
$strSetupForm_Browse_desc = 'Customize browse mode';  //to translate
$strSetupForm_Edit = 'Edit mode';  //to translate
$strSetupForm_Edit_desc = 'Customize edit mode';  //to translate
$strSetupForm_Tabs = 'Tabs';  //to translate
$strSetupForm_Tabs_desc = 'Choose how you want tabs to work';  //to translate
$strSetupForm_Sql_box = 'SQL Query box';  //to translate
$strSetupForm_Sql_box_desc = 'Customize links shown in SQL Query boxes';  //to translate
$strSetupForm_Import_defaults = 'Import defaults';  //to translate
$strSetupForm_Import_defaults_desc = 'Customize default common import options';  //to translate
$strSetupForm_Export_defaults = 'Export defaults';  //to translate
$strSetupForm_Export_defaults_desc = 'Customize default export options';  //to translate
$strSetupForm_Query_window = 'Query window';  //to translate
$strSetupForm_Query_window_desc = 'Customize query window options';  //to translate
$strSetupServers_verbose_name = 'Verbose name of this server';  //to translate
$strSetupServers_verbose_desc = 'Hostname where MySQL server is running';  //to translate
$strSetupServers_host_name = 'Server hostname';  //to translate
$strSetupServers_host_desc = '';  //to translate
$strSetupServers_port_name = 'Server port';  //to translate
$strSetupServers_port_desc = 'Port on which MySQL server is listening, leave empty for default';  //to translate
$strSetupServers_socket_name = 'Server socket';  //to translate
$strSetupServers_socket_desc = 'Socket on which MySQL server is listening, leave empty for default';  //to translate
$strSetupServers_ssl_name = 'Use SSL';  //to translate
$strSetupServers_ssl_desc = '';  //to translate
$strSetupServers_connect_type_name = 'Connection type';  //to translate
$strSetupServers_connect_type_desc = 'How to connect to server, keep tcp if unsure';  //to translate
$strSetupServers_extension_name = 'PHP extension to use';  //to translate
$strSetupServers_compress_name = 'Compress connection';  //to translate
$strSetupServers_compress_desc = 'Compress connection to MySQL server';  //to translate
$strSetupServers_auth_type_name = 'Authentication type';  //to translate
$strSetupServers_auth_type_desc = 'Authentication method to use';  //to translate
$strSetupServers_user_name = 'User for config auth';  //to translate
$strSetupServers_user_desc = 'Leave empty if not using config auth';  //to translate
$strSetupServers_password_name = 'Password for config auth';  //to translate
$strSetupServers_password_desc = 'Leave empty if not using config auth';  //to translate
$strSetupServers_nopassword_name = 'Connect without password';  //to translate
$strSetupServers_nopassword_desc = 'Try to connect without password';  //to translate
$strSetupServers_SignonSession_name = 'Signon session name';  //to translate
$strSetupServers_SignonSession_desc = 'See [a@http://wiki.cihar.com/pma/auth_types#signon]authentication types[/a] for an example';  //to translate
$strSetupServers_SignonURL_name = 'Signon URL';  //to translate
$strSetupServers_LogoutURL_name = 'Logout URL';  //to translate
$strSetupServers_auth_swekey_config_name = 'SweKey config file';  //to translate
$strSetupServers_only_db_name = 'Show only listed databases';  //to translate
$strSetupServers_only_db_desc = 'You can use MySQL wildcard characters (% and _), escape them if you want to use their literal instances, i.e. use \'my\_db\' and not \'my_db\'';  //to translate
$strSetupServers_hide_db_name = 'Hide databases';  //to translate
$strSetupServers_hide_db_desc = 'Hide databases matching regular expression (PCRE)';  //to translate
$strSetupServers_AllowRoot_name = 'Allow root login';  //to translate
$strSetupServers_AllowNoPasswordRoot_name = 'Allow root without password';  //to translate
$strSetupServers_DisableIS_name = 'Disable use of INFORMATION_SCHEMA';  //to translate
$strSetupServers_DisableIS_desc = 'More information on [a@http://sf.net/support/tracker.php?aid=1849494]PMA bug tracker[/a] and [a@http://bugs.mysql.com/19588]MySQL Bugs[/a]';  //to translate
$strSetupServers_AllowDeny_order_name = 'Host authentication order';  //to translate
$strSetupServers_AllowDeny_order_desc = 'Leave blank if not used';  //to translate
$strSetupServers_AllowDeny_rules_name = 'Host authentication rules';  //to translate
$strSetupServers_AllowDeny_rules_desc = 'Leave blank for defaults';  //to translate
$strSetupServers_ShowDatabasesCommand_name = 'SHOW DATABASES command';  //to translate
$strSetupServers_ShowDatabasesCommand_desc = 'SQL command to fetch available databases';  //to translate
$strSetupServers_CountTables_name = 'Count tables';  //to translate
$strSetupServers_CountTables_desc = 'Count tables when showing database list';  //to translate
$strSetupServers_pmadb_name = 'PMA database';  //to translate
$strSetupServers_pmadb_desc = 'Database used for relations, bookmarks, and PDF features. See [a@http://wiki.cihar.com/pma/pmadb]pmadb[/a] for complete information. Leave blank for no support. Default: [kbd]phpmyadmin[/kbd]';  //to translate
$strSetupServers_controluser_name = 'Control user';  //to translate
$strSetupServers_controluser_desc = 'A special MySQL user configured with limited permissions, more information available on [a@http://wiki.cihar.com/pma/controluser]wiki[/a]';  //to translate
$strSetupServers_controlpass_name = 'Control user password';  //to translate
$strSetupServers_verbose_check_name = 'Verbose check';  //to translate
$strSetupServers_verbose_check_desc = 'Disable if you know that your pma_* tables are up to date. This prevents compatibility checks and thereby increases performance';  //to translate
$strSetupServers_bookmarktable_name = 'Bookmark table';  //to translate
$strSetupServers_bookmarktable_desc = 'Leave blank for no [a@http://wiki.cihar.com/pma/bookmark]bookmark[/a] support, default: [kbd]pma_bookmark[/kbd]';  //to translate
$strSetupServers_relation_name = 'Relation table';  //to translate
$strSetupServers_relation_desc = 'Leave blank for no [a@http://wiki.cihar.com/pma/relation]relation-links[/a] support, default: [kbd]pma_relation[/kbd]';  //to translate
$strSetupServers_table_info_name = 'Display fields table';  //to translate
$strSetupServers_table_info_desc = 'Table to describe the display fields, leave blank for no support; default: [kbd]pma_table_info[/kbd]';  //to translate
$strSetupServers_table_coords_name = 'PDF schema: table coordinates';  //to translate
$strSetupServers_table_coords_desc = 'Leave blank for no PDF schema support, default: [kbd]pma_table_coords[/kbd]';  //to translate
$strSetupServers_pdf_pages_name = 'PDF schema: pages table';  //to translate
$strSetupServers_pdf_pages_desc = 'Leave blank for no PDF schema support, default: [kbd]pma_pdf_pages[/kbd]';  //to translate
$strSetupServers_column_info_name = 'Column information table';  //to translate
$strSetupServers_column_info_desc = 'Leave blank for no column comments/mime types, default: [kbd]pma_column_info[/kbd]';  //to translate
$strSetupServers_history_name = 'SQL query history table';  //to translate
$strSetupServers_history_desc = 'Leave blank for no SQL query history support, default: [kbd]pma_history[/kbd]';  //to translate
$strSetupServers_designer_coords_name = 'Designer table';  //to translate
$strSetupServers_designer_coords_desc = 'Leave blank for no Designer support, default: [kbd]designer_coords[/kbd]';  //to translate
$strSetupUploadDir_name = 'Upload directory';  //to translate
$strSetupUploadDir_desc = 'Directory on server where you can upload files for import';  //to translate
$strSetupSaveDir_name = 'Save directory';  //to translate
$strSetupSaveDir_desc = 'Directory where exports can be saved on server';  //to translate
$strSetupAllowAnywhereRecoding_name = 'Allow character set conversion';  //to translate
$strSetupDefaultCharset_name = 'Default character set';  //to translate
$strSetupDefaultCharset_desc = 'Default character set used for conversions';  //to translate
$strSetupRecodingEngine_name = 'Recoding engine';  //to translate
$strSetupRecodingEngine_desc = 'Select which functions will be used for character set conversion';  //to translate
$strSetupIconvExtraParams_name = 'Extra parameters for iconv';  //to translate
$strSetupZipDump_name = 'ZIP';  //to translate
$strSetupZipDump_desc = 'Enable [a@http://en.wikipedia.org/wiki/ZIP_(file_format)]ZIP[/a] compression for import and export operations';  //to translate
$strSetupGZipDump_name = 'GZip';  //to translate
$strSetupGZipDump_desc = 'Enable [a@http://en.wikipedia.org/wiki/Gzip]gzip[/a] compression for import and export operations';  //to translate
$strSetupBZipDump_name = 'Bzip2';  //to translate
$strSetupBZipDump_desc = 'Enable [a@http://en.wikipedia.org/wiki/Bzip2]bzip2[/a] compression for import and export operations';  //to translate
$strSetupCompressOnFly_name = 'Compress on the fly';  //to translate
$strSetupCompressOnFly_desc = 'Compress gzip/bzip2 exports on the fly without the need for much memory; if you encounter problems with created gzip/bzip2 files disable this feature';  //to translate
$strSetupblowfish_secret_name = 'Blowfish secret';  //to translate
$strSetupblowfish_secret_desc = 'Secret passphrase used for encrypting cookies in [kbd]cookie[/kbd] authentication';  //to translate
$strSetupForceSSL_name = 'Force SSL connection';  //to translate
$strSetupForceSSL_desc = 'Force secured connection while using phpMyAdmin';  //to translate
$strSetupCheckConfigurationPermissions_name = 'Check config file permissions';  //to translate
$strSetupTrustedProxies_name = 'List of trusted proxies for IP allow/deny';  //to translate
$strSetupTrustedProxies_desc = 'Input proxies as [kbd]IP: trusted HTTP header[/kbd]. The following example specifies that phpMyAdmin should trust a HTTP_X_FORWARDED_FOR (X-Forwarded-For) header coming from the proxy 1.2.3.4:[br][kbd]1.2.3.4: HTTP_X_FORWARDED_FOR[/kbd]';  //to translate
$strSetupAllowUserDropDatabase_name = 'Show &quot;Drop database&quot; link to normal users';  //to translate
$strSetupAllowArbitraryServer_name = 'Allow login to any MySQL server';  //to translate
$strSetupAllowArbitraryServer_desc = 'If enabled user can enter any MySQL server in login form for cookie auth';  //to translate
$strSetupLoginCookieRecall_name = 'Recall user name';  //to translate
$strSetupLoginCookieRecall_desc = 'Define whether the previous login should be recalled or not in cookie authentication mode';  //to translate
$strSetupLoginCookieValidity_name = 'Login cookie validity';  //to translate
$strSetupLoginCookieValidity_desc = 'Define how long (in seconds) a login cookie is valid';  //to translate
$strSetupLoginCookieStore_name = 'Login cookie store';  //to translate
$strSetupLoginCookieDeleteAll_name = 'Delete all cookies on logout';  //to translate
$strSetupShowSQL_name = 'Show SQL queries';  //to translate
$strSetupShowSQL_desc = 'Defines whether SQL queries generated by phpMyAdmin should be displayed';  //to translate
$strSetupConfirm_name = 'Confirm DROP queries';  //to translate
$strSetupConfirm_desc = 'Whether a warning (&quot;Are your really sure...&quot;) should be displayed when you\'re about to lose data';  //to translate
$strSetupQueryHistoryDB_name = 'Permanent query history';  //to translate
$strSetupQueryHistoryDB_desc = 'Enable if you want DB-based query history (requires pmadb). If disabled, this utilizes JS-routines to display query history (lost by window close).';  //to translate
$strSetupQueryHistoryMax_name = 'Query history length';  //to translate
$strSetupQueryHistoryMax_desc = 'How many queries are kept in history';  //to translate
$strSetupIgnoreMultiSubmitErrors_name = 'Ignore multiple statement errors';  //to translate
$strSetupVerboseMultiSubmit_name = 'Verbose multiple statements';  //to translate
$strSetupVerboseMultiSubmit_desc = 'Show affected rows of each statement on multiple-statement queries. See libraries/import.lib.php for defaults on how many queries a statement may contain.';  //to translate
$strSetupMaxDbList_name = 'Maximum databases';  //to translate
$strSetupMaxDbList_desc = 'Maximum number of databases displayed in left frame and database list';  //to translate
$strSetupMaxTableList_name = 'Maximum tables';  //to translate
$strSetupMaxTableList_desc = 'Maximum number of tables displayed in table list';  //to translate
$strSetupMaxCharactersInDisplayedSQL_name = 'Maximum displayed SQL length';  //to translate
$strSetupMaxCharactersInDisplayedSQL_desc = 'Maximum number of characters used when a SQL query is displayed';  //to translate
$strSetupOBGzip_name = 'GZip output buffering';  //to translate
$strSetupOBGzip_desc = 'use GZip output buffering for increased speed in HTTP transfers';  //to translate
$strSetupPersistentConnections_name = 'Persistent connections';  //to translate
$strSetupPersistentConnections_desc = 'Use persistent connections to MySQL databases';  //to translate
$strSetupExecTimeLimit_name = 'Maximum execution time';  //to translate
$strSetupExecTimeLimit_desc = 'Set the number of seconds a script is allowed to run ([kbd]0[/kbd] for no limit)';  //to translate
$strSetupMemoryLimit_name = 'Memory limit';  //to translate
$strSetupMemoryLimit_desc = 'The number of bytes a script is allowed to allocate, eg. [kbd]32M[/kbd] ([kbd]0[/kbd] for no limit)';  //to translate
$strSetupSkipLockedTables_name = 'Skip locked tables';  //to translate
$strSetupSkipLockedTables_desc = 'Mark used tables and make it possible to show databases with locked tables';  //to translate
$strSetupUseDbSearch_name = 'Use database search';  //to translate
$strSetupUseDbSearch_desc = 'Allow for searching inside the entire database';  //to translate
$strSetupLeftFrameLight_name = 'Use light version';  //to translate
$strSetupLeftFrameLight_desc = 'Disable this if you want to see all databases at once';  //to translate
$strSetupLeftDisplayLogo_name = 'Display logo';  //to translate
$strSetupLeftDisplayLogo_desc = 'Show logo in left frame';  //to translate
$strSetupLeftLogoLink_name = 'Logo link URL';  //to translate
$strSetupLeftLogoLinkWindow_name = 'Logo link target';  //to translate
$strSetupLeftLogoLinkWindow_desc = 'Open the linked page in the main window ([kbd]main[/kbd]) or in a new one ([kbd]new[/kbd])';  //to translate
$strSetupLeftDefaultTabTable_name = 'Target for quick access icon';  //to translate
$strSetupLeftPointerEnable_name = 'Enable highlighting';  //to translate
$strSetupLeftPointerEnable_desc = 'Highlight server under the mouse cursor';  //to translate
$strSetupLeftDisplayServers_name = 'Display servers selection';  //to translate
$strSetupLeftDisplayServers_desc = 'Display server choice at the top of the left frame';  //to translate
$strSetupDisplayServersList_name = 'Display servers as a list';  //to translate
$strSetupDisplayServersList_desc = 'Show server listing as a list instead of a drop down';  //to translate
$strSetupDisplayDatabasesList_name = 'Display databases as a list';  //to translate
$strSetupDisplayDatabasesList_desc = 'Show database listing as a list instead of a drop down';  //to translate
$strSetupLeftFrameDBTree_name = 'Display databases in a tree';  //to translate
$strSetupLeftFrameDBTree_desc = 'Only light version; display databases in a tree (determined by the separator defined below)';  //to translate
$strSetupLeftFrameDBSeparator_name = 'Database tree separator';  //to translate
$strSetupLeftFrameDBSeparator_desc = 'String that separates databases into different tree levels';  //to translate
$strSetupShowTooltipAliasDB_name = 'Display database comment instead of its name';  //to translate
$strSetupShowTooltipAliasDB_desc = 'If tooltips are enabled and a database comment is set, this will flip the comment and the real name';  //to translate
$strSetupLeftFrameTableSeparator_name = 'Table tree separator';  //to translate
$strSetupLeftFrameTableSeparator_desc = 'String that separates tables into different tree levels';  //to translate
$strSetupLeftFrameTableLevel_name = 'Maximum table tree depth';  //to translate
$strSetupShowTooltip_name = 'Display table comments in tooltips';  //to translate
$strSetupShowTooltipAliasTB_name = 'Display table comment instead of its name';  //to translate
$strSetupShowTooltipAliasTB_desc = 'When setting this to [kbd]nested[/kbd], the alias of the table name is only used to split/nest the tables according to the $cfg[\'LeftFrameTableSeparator\'] directive, so only the folder is called like the alias, the table name itself stays unchanged';  //to translate
$strSetupShowStats_name = 'Show statistics';  //to translate
$strSetupShowStats_desc = 'Allow to display database and table statistics (eg. space usage)';  //to translate
$strSetupShowPhpInfo_name = 'Show phpinfo() link';  //to translate
$strSetupShowPhpInfo_desc = 'Shows link to [a@http://php.net/manual/function.phpinfo.php]phpinfo()[/a] output';  //to translate
$strSetupShowServerInfo_name = 'Show detailed MySQL server information';  //to translate
$strSetupShowChgPassword_name = 'Show password change form';  //to translate
$strSetupShowChgPassword_desc = 'Please note that enabling this has no effect with [kbd]config[/kbd] authentication mode because the password is hard coded in the configuration file; this does not limit the ability to execute the same command directly';  //to translate
$strSetupShowCreateDb_name = 'Show create database form';  //to translate
$strSetupSuggestDBName_name = 'Suggest new database name';  //to translate
$strSetupSuggestDBName_desc = 'Suggest a database name on the &quot;Create Database&quot; form (if possible) or keep the text field empty';  //to translate
$strSetupNavigationBarIconic_name = 'Iconic navigation bar';  //to translate
$strSetupNavigationBarIconic_desc = 'Use only icons, only text or both';  //to translate
$strSetupShowAll_name = 'Allow to display all the rows';  //to translate
$strSetupShowAll_desc = 'Whether a user should be displayed a &quot;show all (records)&quot; button';  //to translate
$strSetupMaxRows_name = 'Maximum number of rows to display';  //to translate
$strSetupMaxRows_desc = 'Number of rows displayed when browsing a result set. If the result set contains more rows, &quot;Previous&quot; and &quot;Next&quot; links will be shown.';  //to translate
$strSetupOrder_name = 'Default sorting order';  //to translate
$strSetupOrder_desc = '[kbd]SMART[/kbd] - i.e. descending order for fields of type TIME, DATE, DATETIME and TIMESTAMP, ascending order otherwise';  //to translate
$strSetupBrowsePointerEnable_name = 'Highlight pointer';  //to translate
$strSetupBrowsePointerEnable_desc = 'Highlight row pointed by the mouse cursor';  //to translate
$strSetupBrowseMarkerEnable_name = 'Row marker';  //to translate
$strSetupBrowseMarkerEnable_desc = 'Highlight selected rows';  //to translate
$strSetupProtectBinary_name = 'Protect binary fields';  //to translate
$strSetupProtectBinary_desc = 'Disallow BLOB and BINARY fields from editing';  //to translate
$strSetupShowFunctionFields_name = 'Show function fields';  //to translate
$strSetupShowFunctionFields_desc = 'Display the function fields in edit/insert mode';  //to translate
$strSetupCharEditing_name = 'CHAR fields editing';  //to translate
$strSetupCharEditing_desc = 'Defines which type of editing controls should be used for CHAR and VARCHAR fields; [kbd]input[/kbd] - allows limiting of input length, [kbd]textarea[/kbd] - allows newlines in fields';  //to translate
$strSetupCharTextareaCols_name = 'CHAR textarea columns';  //to translate
$strSetupCharTextareaCols_desc = 'Number of columns for CHAR/VARCHAR textareas';  //to translate
$strSetupCharTextareaRows_name = 'CHAR textarea rows';  //to translate
$strSetupCharTextareaRows_desc = 'Number of rows for CHAR/VARCHAR textareas';  //to translate
$strSetupInsertRows_name = 'Number of inserted rows';  //to translate
$strSetupInsertRows_desc = 'How many rows can be inserted at one time';  //to translate
$strSetupForeignKeyDropdownOrder_name = 'Foreign key dropdown order';  //to translate
$strSetupForeignKeyDropdownOrder_desc = 'Sort order for items in a foreign-key dropdown box; [kbd]content[/kbd] is the referenced data, [kbd]id[/kbd] is the key value';  //to translate
$strSetupForeignKeyMaxLimit_name = 'Foreign key limit';  //to translate
$strSetupForeignKeyMaxLimit_desc = 'A dropdown will be used if fewer items are present';  //to translate
$strSetupLightTabs_name = 'Light tabs';  //to translate
$strSetupLightTabs_desc = 'Use less graphically intense tabs';  //to translate
$strSetupPropertiesIconic_name = 'Iconic table operations';  //to translate
$strSetupPropertiesIconic_desc = 'Use only icons, only text or both';  //to translate
$strSetupDefaultTabServer_name = 'Default server tab';  //to translate
$strSetupDefaultTabServer_desc = 'Tab that is displayed when entering a server';  //to translate
$strSetupDefaultTabDatabase_name = 'Default database tab';  //to translate
$strSetupDefaultTabDatabase_desc = 'Tab that is displayed when entering a database';  //to translate
$strSetupDefaultTabTable_name = 'Default table tab';  //to translate
$strSetupDefaultTabTable_desc = 'Tab that is displayed when entering a table';  //to translate
$strSetupQueryWindowDefTab_name = 'Default query window tab';  //to translate
$strSetupQueryWindowDefTab_desc = 'Tab displayed when opening a new query window';  //to translate
$strSetupSQLQuery_Edit_name = 'Edit';  //to translate
$strSetupSQLQuery_Explain_name = 'Explain SQL';  //to translate
$strSetupSQLQuery_ShowAsPHP_name = 'Create PHP Code';  //to translate
$strSetupSQLQuery_Validate_name = 'Validate SQL';  //to translate
$strSetupSQLQuery_Refresh_name = 'Refresh';  //to translate
$strSetupImport_format_name = 'Format of imported file';  //to translate
$strSetupImport_allow_interrupt_name = 'Partial import: allow interrupt';  //to translate
$strSetupImport_allow_interrupt_desc = 'Allow interrupt of import in case script detects it is close to time limit. This might be good way to import large files, however it can break transactions.';  //to translate
$strSetupImport_skip_queries_name = 'Partial import: skip queries';  //to translate
$strSetupImport_skip_queries_desc = 'Number of records (queries) to skip from start';  //to translate
$strSetupExport_format_name = 'Format';  //to translate
$strSetupExport_compression_name = 'Compression';  //to translate
$strSetupExport_asfile_name = 'Save as file';  //to translate
$strSetupExport_charset_name = 'Character set of the file';  //to translate
$strSetupExport_onserver_name = 'Save on server';  //to translate
$strSetupExport_onserver_overwrite_name = 'Overwrite existing file(s)';  //to translate
$strSetupExport_remember_file_template_name = 'Remember file name template';  //to translate
$strSetupExport_file_template_table_name = 'Table name template';  //to translate
$strSetupExport_file_template_database_name = 'Database name template';  //to translate
$strSetupExport_file_template_server_name = 'Server name template';  //to translate
$strSetupBlowfishSecretCharsMsg = 'Key should contain letters, numbers [em]and[/em] special characters';  //to translate
$strSetupBlowfishSecretMsg = 'You didn\'t have blowfish secret set and have enabled cookie authentication, so a key was automatically generated for you. It is used to encrypt cookies; you don\'t need to remember it.';  //to translate
$strSetupIgnoreMultiSubmitErrors_desc = 'If enabled, phpMyAdmin continues computing multiple-statement queries even if one of the queries failed';  //to translate
$strSetupImport_format_desc = 'Default format; be aware that this list depends on location (database, table) and only SQL is always available';  //to translate
$strSetupInsecureConnectionMsg1 = 'You are not using a secure connection; all data (including potentially sensitive information, like passwords) is transferred unencrypted!';  //to translate
$strSetupLoginCookieDeleteAll_desc = 'If TRUE, logout deletes cookies for all servers; when set to FALSE, logout only occurs for the current server. Setting this to FALSE makes it easy to forget to log out from other servers when connected to multiple servers.';  //to translate
$strSetupLoginCookieStore_desc = 'Define how long (in seconds) a login cookie should be stored in browser. The default of 0 means that it will be kept for the existing session only, and will be deleted as soon as you close the browser window. This is recommended for non-trusted environments.';  //to translate
$strSetupServerAuthConfigMsg = 'You set the [kbd]config[/kbd] authentication type and included username and password for auto-login, which is not a desirable option for live hosts. Anyone who knows or guesses your phpMyAdmin URL can directly access your phpMyAdmin panel. Set [a@?page=servers&amp;mode=edit&amp;id=%1$d#tab_Server]authentication type[/a] to [kbd]cookie[/kbd] or [kbd]http[/kbd].';  //to translate
$strSetupServers_extension_desc = 'What PHP extension to use; you should use mysqli if supported';  //to translate
$strSetupVersionCheckNewAvailable = 'A newer version of phpMyAdmin is available and you should consider upgrading. The newest version is %s, released on %s.';  //to translate
$strSetupServers_auth_swekey_config_desc = 'The path for the config file for [a@http://swekey.com]SweKey hardware authentication[/a] (not located in your document root; suggested: /etc/swekey.conf)';  //to translate
?>
